Owner manual

AlliedView™-EMS 3.11 QoS Manager User’s Guide Page 140 of 146
Property Name Description Valid Values
• DEC LAT
• DEC DIAGNOSTIC
• DEC CUSTOMER
• DEC LAVC
• RARP
• DEC LANBRIDGE
• DEC ENCRYPTION
• APPLETALK
• IBM SNA
• IPX ETHII
• APPLETALK AARP
• SNMP
• IPV6 ETHII
• IPX 802.3
• ETHERTALK 2
• ETHERTALK 2 AARP
• IPX SNAP
• any
This can also be set by entering a 1
to 5 byte hexadecimal value (00-
FFFFFFFFFF).
Source TCP Port Specifies the TCP source port of a
TCP/IP packet.
Enter an integer value from 0-
65535.
The value "any" is also accepted.
Destination TCP
Port
Specifies the TCP destination port
of a TCP/IP packet.
Range: any, 0-65535
Source UDP Port Specifies the UDP source port of an
UDP/IP packet.
Range: any, 0-65535
Destination UDP
Port
Specifies the UDP destination port
of an UDP/IP packet.
Range: any, 0-65535
6.10.2 Flow Groups
6.10.2.1 QoS Information Window
Column Name Description
Flow Group ID Lists the ID of Flow Groups available
Description A brief description of the Flow Group.
Classifiers List of Classifiers associated with this Flow Group
6.10.2.2 Add/Modify Flow Group
Property Name Description Valid Values
Flow Group ID
(cannot be
Specifies the unique identifier for
the flow group.
Range: 0-1023