Owner manual

AlliedView™-EMS 3.11 QoS Manager User’s Guide Page 118 of 146
Property
Name
Description Valid Values
Default Traffic
Class Drop
Bandwidth
Class3
Determines whether or not to
drop frames exceedin
g
the default
traffic class maximum bandwidth
setting.
• yes
• no
Default Traffic
Class Ignore
Bandwidth
Class3
Determines whether or not the
metering stage acknowledges any
previous bandwidth class assigned
to flows processed by the default
traffic class.
• yes
• no
Default Traffic
Class Max
Bandwidth
Specifies the maximum bandwidth
available to the default traffic
class.
This can be set by entering a value using
one the following formats:
• 0-16000000 kbps
• 0-16000 Mbps (decimal point
supported)
• 0-16 Gbps (decimal point
supported)
• none
Default Traffic
Class Max
Burst Size
Specifies the burst tolerance for
the default traffic class maximum
bandwidth parameter.
This can be set by entering a value using
one the following formats:
• 0-16777216 bytes
• 0~16384 KB (decimal point
supported)
• 0~16 MB (decimal point
supported)
• 0~0.015628 GB (decimal point
supported)
Note - Byte measures can have the value
b,k,kb,m,mb,g,gb (case insensitive)
Default Traffic
Class Min
Bandwidth
Specifies the minimum bandwidth
reserved for the traffic class.
This can be set by entering a value using
one the following formats:
• 0-16000000 kbps
• 0-16000 Mbps (decimal point
supported)
• 0-16 Gbps (decimal point
supported)
• none
Default Traffic
Class Min
Burst Size
Specifies the burst tolerance for
the default traffic class minumum
bandwidth, or for the default
This can be set by entering a value using
one the following formats: