User Manual

AlliedView™-EMS 3.11 Device Management Guide Page 219 of 402
 Destination Metric 1
 Destination Metric 2
 Destination Metric 3
 Destination Metric 4
 Destination Metric 5
 Row Status
IP Statistics
Displays statistics about IP, such as the number of IP datagrams received.
Note - The Default TTL parameter is implemented as 'read-only'.
UDP
Listener Info
Displays UDP listener information.
UDP Statistics
Displays UDP statistics.
TCP
Connection Info
Displays TCP connection-specific information.
Note - The Connection Status parameter is implemented as 'read-only'.
TCP Statistics
Displays TCP statistics.
ICMP Statistics
Displays ICMP statistics.
BGP
General Info
Displays information about the BGP module.
Peer Info
Displays BGP Peer information.
Note - The current firmware version does not allow the following parameters to be
configured:
 Connect Retry Interval
 Configured Hold Time
 Configured Keep Alive
 Min AS Origination Interval
 Min Route Advertisement Interval
Path Attributes
Displays the BGP path attributes.