Manual

AlliedView™-EMS 3.11 Device Manager User’s Guide Page 80 of 130
To set a threshold, enter a threshold value in the Value field, then click OK. Note that this
specifies a rising threshold which triggers an event when the variable's value increases to
exceed the threshold, i.e. crosses the threshold from below.
When the threshold is reached, a pop-up message is displayed or a predefined command is
executed. You can select which action is executed in the Option > Option > User Action
tab.
Note - Thresholds can only be used for variables of type GAUGE, INTEGER, COUNTER,
GAUGE32, INTEGER32, COUNTER32, or COUNTER64.
6 MIB Variable Window