Manual

AlliedView™-EMS 3.11 Device Manager User’s Guide Page 18 of 130
Note - HP-UX : When manually adding an AT-AR255E running firmware v1.0.2 to the
network map in HP OpenView, use the device’s host name, as specified in the local hosts
file, for the Hostname field in the IP Map dialog. Using the device’s IP address instead of its
host name will reset the Hostname field to “RIP2-ROUTERS.MCAST.NET” causing Device
Manager to connect to any RIP2 router present in the network when started within HP
OpenView.
Note - HP OpenView can only start Device Manager in SNMPv1 mode.