AlliedView™-EMS 3.10 (Full Installation) VLAN MANAGER USER’S GUIDE AlliedView™-EMS 3.
TABLE OF CONTENTS 1 OVERVIEW......................................................................................................................................................................... 5 2 STARTING VLAN MANAGER ....................................................................................................................................... 6 3 MAIN WINDOW.........................................................................................................................................
6.5 AT-8324..........................................................................................................................................................................41 6.5.1 VLAN Information Window .......................................................................................41 6.5.2 Add/Modify VLAN Dialogs ..........................................................................................42 6.6 AT-8300GB SERIES ..............................................................
6.17.3 Notes .............................................................................................................................70 AlliedView™-EMS 3.
1 Overview VLAN Manager is a tool that enables you to configure VLANs on a device using a graphical user interface (GUI) or by importing VLAN definitions from a file. Topics • • • • • Starting VLAN Manager Main Window Basic Operations Menus Device Support 1 Overview AlliedView™-EMS 3.
2 Starting VLAN Manager VLAN Manager can be started from Device Manager or from the command line. In a Windows environment, VLAN Manager can be started from the AlliedView-EMS program folder or from the Run command of the Start menu. You can start VLAN Manager from Device Manager by clicking on Tool > VLAN Manager on the main menu or by clicking on the VLAN Manager icon on the toolbar.
3 Main Window When started, VLAN Manager displays one of the following windows, depending on how it is started. Topics: • • Initial Window VLAN Information Window 3 Main Window AlliedView™-EMS 3.
3.1 Initial Window If the target host is not specified, or if one or more connection parameters do not match what is configured on the host, the following window appears. Initial Window To specify a target host from this window, select File > Open. If the target host is a device model that is supported by VLAN Manager, the VLAN Information Window displaying the target host's VLAN configuration will appear. 3 Main Window AlliedView™-EMS 3.
3.2 VLAN Information Window When a target host is specified and VLAN Manager recognizes it as a device model that it supports, the following window appears. VLAN Information Window The menu bar provides access to VLAN Manager's operations. The VLAN Information Window displays the VLAN configuration of the device being managed. Information is organized in a table format with each row representing one VLAN definition and each column representing one attribute of the VLAN.
4 Basic Operations This chapter discusses the basic operations within VLAN Manager windows. Topics • • • Selecting VLAN Definitions Device Panel VLAN Configuration Files 4 Basic Operations AlliedView™-EMS 3.
4.1 Selecting VLAN Definitions To select a VLAN definition in the VLAN Information Window or the Import VLAN dialog box, click on a row. To select multiple contiguous VLAN definitions, hold down the Shift key while clicking on the desired VLAN definitions. To select multiple non-contiguous VLAN definitions, hold down the Ctrl key while clicking on the desired VLAN definitions. 4 Basic Operations AlliedView™-EMS 3.
4.2 Device Panel A device panel that reflects the actual ports available on the target host is used to create or modify a VLAN definition. Note - The AT-A48/SC, AT-A48/MT and AT-A49 Expansion Modules for the AT-8350GB are not supported and will not show up on the device panel. Device Panel Note - For device models with redundant ports, use the RJ-45 ports to associate redundant ports to a VLAN. Note - Rel 2.9.1 of the AT-8800 series firmware does not return the correct connector type for the GBIC ports.
Port Image State Description untagged (port-based) member of the VLAN. Note - For the AT-8600, AT-8700XL, AT-8800 and Rapier series, this port is a private tagged member of the Private VLAN. Selected Flagged Note - For the AT-8900 and AT-9900 series, this port is either a private tagged member of the Private VLAN or a core member of the Nested VLAN. Note - For the AT-8600, AT-8700XL, AT-8800, Rapier, AT8900 and AT-9900 series, this port is an uplink untagged member of the Private VLAN.
Port Image State Description G-Flagged This port is a general tagged member of the VLAN. Forbidden This port is a forbidden member of the VLAN. Clicking on a port will change its state as follows: Current State New State 4 Basic Operations AlliedView™-EMS 3.
4.3 VLAN Configuration Files VLAN Configuration Files are Comma Separated Value (CSV) files containing VLAN definitions and are used by the Import VLAN and Export VLAN functions. The format of the VLAN Configuration File is as follows: VLAN_Entry1_Name, VLAN_Entry1_Identifier, attribute1, attribute2, etc. VLAN_Entry2_Name, VLAN_Entry2_Identifier, attribute1, attribute2, etc. and so on... VLAN attributes will differ in number, order and allowed values from one device series to another.
5 Menus This chapter describes the items on VLAN Manager's main menu. Topics: • • • • • File Edit View Tools Help 5 Menus AlliedView™-EMS 3.
5.1 File The File menu lets you connect to and disconnect from a target host, check the properties of the target host, or exit VLAN Manager. Topics: • • • • Open Close Properties Exit 5.1.1 Open This option allows you to specify a target host to connect to. When you select File > Open, the following dialog box appears. To connect to the device, fill in parameters in the dialog box, and click OK. Note - This option is not available if VLAN Manager is already connected to a target host.
SNMP Version This drop down list allows you to select the SNMP version to use in managing the target device. Note - Before choosing "v2c" or "v3", make sure that the target device you are connecting to supports SNMP v2c and/or SNMP v3 respectively. Settings If the Version is set to "v1" or "v2c", this button opens the SNMP v1/v2c Settings window. Otherwise, if the Version is set to "v3", this button opens the SNMP v3 Settings window.
SNMP v3 Settings dialog box User Account Name This is the SNMPv3 User Account to be used for accessing the MIB of the target device. Make sure to specify a User Account that has already been configured on the target device. Security Level This is the Security Level for the User Account Name that you have specified. Make sure to set the Security Level that is configured for the User Account Name on the target device.
SHA Use HMAC-SHA-96 protocol Authentication Password If the Security Level is "Auth / No Priv" or " Auth / Priv", you need to specify an Authentication Password that is configured for the User Account Name on the target device. Privacy Protocol If the Security Level is "Auth / Priv", you need to specify a Privacy Protocol.
5.1.3 Properties The Properties dialog box allows you to modify the connection settings for the connected device. The Properties dialog box is identical to the Open dialog box used to open a connection. See Section 5.1.1 - Open. Note - This option is only available if VLAN Manager is already connected to a target host. 5.1.4 Exit This option terminates connection to the target host and closes the VLAN Manager application. 5 Menus AlliedView™-EMS 3.
5.2 Edit The Edit menu lets you modify the VLAN configuration of the currently connected device. You can also save the VLAN configuration of the device to a file. Topics: • • • • • • Add VLAN Modify VLAN Delete VLAN Update VLAN Mode Import VLAN Export VLAN 5.2.1 Add VLAN This option opens the Add VLAN dialog box that allows you to create a VLAN definition. Add VLAN dialog box 5.2.1.1 Input Fields The Input Fields are the attributes that serve as VLAN creation parameters.
5.2.1.2 Adding/Removing Ports You can add ports to or remove ports from a VLAN definition by clicking on the port images on the device panel. Refer to Section 4.2 - Device Panel for details on how to specify tagged and untagged ports, uplink untagged and uplink tagged ports, private untagged and private tagged ports, core and customer ports and to unselect ports. Adding/Removing Ports In the illustration above, a new VLAN definition is being created for a Rapier 24i.
New VLAN definition added to VLAN Information Window After clicking the OK button, the new Add VLAN dialog will be closed and the new VLAN entry will be added to the Main window's Information Pane. 5.2.1.4 Cancel Button The Cancel Button cancels the Add VLAN operation and closes the Add VLAN dialog box. 5.2.2 Modify VLAN This option opens the Modify VLAN dialog box that allows you to change specific attributes of a VLAN. Note - This option is only available if a VLAN definition is selected.
Modify VLAN dialog box 5.2.2.1 Input Fields The Input Fields are attributes of the VLAN definition to be modified. Depending on the device, one or more of the fields may be disabled and cannot be modified. Refer to Section 6 - Device Support for details on the specific attributes that can and cannot be modified for each device series. 5.2.2.2 Modifying Ports You can add ports to or remove ports from a VLAN definition by clicking on the port images on the device panel. Refer to Section 4.
Refer to Section 4.1 - Selecting VLAN Definitions for details on how to select multiple VLAN definitions. Delete VLAN confirmation dialog box To remove the selected VLAN definition(s) from the target host and the VLAN Information Window, click Yes. 5.2.4 Update VLAN Mode This option opens the Update VLAN Mode dialog box. Note - This option is only available to the AT-8000 Series, AT-8200XL Series, AT-8400, AT8500 Series, and AT-9400 Series.
5.2.5 Import VLAN This option opens the Import VLAN dialog box that allows you to import VLAN definitions from a VLAN Configuration File, modify the VLAN entries, and overwrite the existing VLAN entries on the currently connected device. Import VLAN dialog Note - Make sure that VLAN Names specified in VLAN Configuration Files do not contain commas. VLAN Manager will ignore all device definitions that specify VLAN Names containing commas.
5.2.5.2 Add Button Clicking the Add Button adds an empty row to the VLAN Definitions Table. Once a row is added, it can be used to define a new VLAN. 5.2.5.3 Delete Button Clicking on the Delete Button removes the selected row(s) from the VLAN Definitions Table. 5.2.5.4 OK Button Once the OK Button is clicked, VLAN Manager deletes all user-configured VLANs from the currently connected device and creates new user-configured VLANs based on the VLANs defined in the VLAN Definitions Table. 5.2.
5.3 View The View menu lets you refresh the contents of the VLAN Information Window. Topics: • Refresh 5.3.1 Refresh This option allows you to refresh the VLAN Information Window with the latest VLAN configuration of the currently connected device. Note - This option is only available if VLAN Manager is already connected to a target host. 5 Menus AlliedView™-EMS 3.
5.4 Tools The Tools menu lets you restart the currently connected device. Topics: • Restart 5.4.1 Restart This option displays a restart confirmation dialog box. Note - This option is only available if VLAN Manager is already connected to a target host. Restart Confirmation dialog box To restart the currently connected device, click Yes. Note - During Restart operations, VLAN Manager may encounter a timeout error and display the message: "Unable to communicate.
5.5 Help The Help menu lets you view the online user's guide as well as some basic information about the application. Topics: • • Index About 5.5.1 Index This option displays the main page of the online user's manual. 5.5.2 About This option displays version and copyright information for VLAN Manager. It also displays a list of the currently supported devices. 5 Menus AlliedView™-EMS 3.
6 Device Support This section describes, on a per device series basis, the specific VLAN attributes displayed in the VLAN Information Window, the input fields that are available in the Add VLAN and Modify VLAN dialog boxes, and any known issues and/or operational notes.
6.1 AT-8000 Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.1.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Name Identifier Tagged Ports Untagged Ports Mirror Port Status Description This is the name of the VLAN. This is the unique identifier of the VLAN. This is a list of the tagged member ports of the VLAN. This is a list of the untagged member ports of the VLAN.
be modified) 0-65535 Mirror Port Note - The default value of 0 indicates that there is no port mirror defined for this VLAN. - 6.1.3 Notes • An uplink port must be specified to change the VLAN Mode to "Multiple VLAN" or to "802.1Q Multiple VLAN". Specifying an incorrect port as the uplink port will cause VLAN Manager to lose connection with the device without any warning. Exercise caution. 6 Device Support AlliedView™-EMS 3.
6.2 AT-8000S Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.2.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. Access (Untagged Ports) This is a list of the untagged member ports of the VLAN whose VLAN membership mode is set to access.
6.2.2 Add/Modify VLAN Dialogs The Add/Modify VLAN Dialogs have the following Input Fields: Input Field Name Valid Values - Alphanumeric characters - Special characters except the following: • Hash Sign ("#") • Period (".") • Colon (":") • Right Angle Bracket (">") • Question Mark ("?") Identifier (cannot 2 - 4093 be modified) Length 1 - 32 characters - 6.2.3 Notes • On Import VLAN, VLAN Manager will automatically trim leading/embedded/trailing spaces from VLAN Names.
• Ports or port channels that are General members of a VLAN and whose PVID is not set to the default configuration (PVID=1) cannot be associated as Access/Trunk members of another VLAN. Attempting to do so will result in the error message: "Port / Channel is untagged in a VLAN which differs from PVID." • During an Add/Modify VLAN operation, VLAN Manager processes and configures ports and port channels sequentially.
6.3 AT-8124XL (v2) Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.3.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. Tagged Ports This is a list of the tagged member ports of the VLAN. Untagged Ports This is a list of the untagged member ports of the VLAN.
6.4 AT-8200XL Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.4.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. Member Ports This is a list of the member ports of the VLAN. Untagged Ports This is a list of the untagged (port-based) member ports of the VLAN.
• If the VLAN Mode of the device is set to "Multiple VLAN", VLAN Manager will display an error message and will not be able to display VLAN definitions in the VLAN Information window. • During an Import VLAN operation, all valid VLAN definitions will be imported successfully except for the Default VLAN. • VLAN Manager will report a successful import of a VLAN definition even if the VLAN definition contains out-of-range member ports. 6 Device Support AlliedView™-EMS 3.
6.5 AT-8324 Topics: • • VLAN Information Window Add/Modify VLAN Dialogs 6.5.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. - Tagged Ports This is a list of the tagged member ports of the VLAN that belong to a specific module on the stack.
6.5.2 Add/Modify VLAN Dialogs The Add/Modify VLAN Dialogs display the following Input Fields: Input Field Valid Values - Alphanumeric characters - Underscore ("_") - Dash ("-") Name Note - VLAN names must contain at least one (1) alphabet character. Length 1 - 19 characters Note - "ALL" is a reserved word and cannot be used as a VLAN name. Identifier (cannot 1 - 2048 be modified) - 6 Device Support AlliedView™-EMS 3.
6.6 AT-8300GB Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.6.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. - Tagged Ports This is a list of the tagged member ports of the VLAN that belong to a specific module on the stack.
6.6.3 Notes • Ports in the Default VLAN cannot be changed from untagged to tagged. • VLAN definitions that only contain tagged ports cannot be deleted. • The Retry Timeout value may have to be increased depending on the number of devices on the stack; otherwise, Add VLAN and Modify VLAN operations may fail. 6 Device Support AlliedView™-EMS 3.
6.7 AT-8400 Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.7.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. Type This indicates the type of the VLAN. • Port Based • MAC Based • Multiple • Multiple 802.1Q Tagged Ports This is a list of the tagged member ports of the VLAN.
6.7.2 Add/Modify VLAN Dialogs The Add/Modify VLAN Dialogs display the following Input Fields: Input Field Valid Values - Alphanumeric characters - Underscore ("_") Name (cannot be - Dash ("-") modified) Note - VLAN names must contain at least one (1) alphabet character. Identifier (cannot 1 - 4094 be modified) Length 1 - 19 characters - 6.7.3 Notes • • An uplink port must be specified to change the VLAN Mode to "Multiple VLAN" or to "802.1Q Multiple VLAN".
6.8 AT-8500 Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.8.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Name Identifier Tagged Ports Untagged Ports Description This is the name of the VLAN. This is the unique identifier of the VLAN. This is a list of the tagged member ports of the VLAN. This is a list of the untagged member ports of the VLAN. This indicates the status of the VLAN.
6.8.3 Notes • The current firmware version does not allow VLAN Manager to distinguish between Protected VLANs, Mac-based VLANs and standard Port-based VLANs. As a result, VLAN Manager will display and treat Protected VLANs and Mac-based VLANs as if they were standard Port-based VLANs. Furthermore, modifying a Protected VLAN or a Mac-based VLAN will convert that VLAN into a standard Port-based VLAN. • An uplink port must be specified to change the VLAN Mode to "Multiple VLAN" or to "802.1Q Multiple VLAN".
• During Restart operations, VLAN Manager may encounter a timeout error and display the message: "Unable to communicate. Confirm SNMP settings or login, and if the network is functional." To prevent this error message from reappearing, go to File -> Properties and increase the Retry Timeout value. • The AT-8500 series does not allow multiple manager sessions.
6.9 AT-8600 Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.9.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. Operation Mode This indicates the operation mode of the VLAN. Tagged Ports This is a list of the tagged member ports of the VLAN.
Input Field Valid Values Operation Mode - Normal (cannot be - Private modified) - Protected Length - 6.9.3 Notes • When importing the default VLAN, VLAN Manager disregards the values specified for Untagged Ports. • During an Import VLAN operation, VLAN Manager will ignore the values specified for the Uplink Port and Private Ports fields if the value specified for the Operation Mode field is "Normal" or "Protected".
6.10 AT-8700XL/AT-8800/Rapier Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.10.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. Operation Mode This indicates the operation mode of the VLAN. Tagged Ports This is a list of the tagged member ports of the VLAN.
Input Field Valid Values AT-8700XL: Rel 2.6.4-00 to Rel 2.6.4-02 - field not applicable Rel 2.6.4-03 or later - Normal/Protected/Private AT-8800: Rel 2.6.3 or lower - Normal/Protected Operation Mode Rel 2.6.4 - Normal/Private (cannot be Rel 2.6.4-04 or later - Normal/Protected/Private modified) Rapier: Rel 2.6.1-10 to 2.6.1-12 Normal/Protected/Private Rel 2.6.3 or lower - Normal/Protected Rel 2.6.4 -Normal/Private Rel 2.6.4-04 or later - Normal/Protected/Private Length - 6.10.
6.11 AT-8900/AT-9900/AT-x900-48 Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.11.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. Operation Mode This indicates the operation mode of the VLAN. Type This indicates the type of the VLAN.
6.11.2 Add/Modify VLAN Dialogs The Add/Modify VLAN Dialogs have the following Input Fields: Input Field Valid Values - Alphanumeric characters - Underscore ("_") - Dash ("-") Name (cannot be Note - VLAN names must contain at least one (1) modified) alphabet character. Note - "ALL" is a reserved word and cannot be used as a VLAN name. Length AT-8900: 1 - 15 characters If the software release version is 2.7.
• When adding/modifying a Nested VLAN, specifying 2 or more core ports where one of the specified ports is already a member of an existing Nested VLAN will result in the error message: "Must return port to the default VLAN as untagged port based." 6 Device Support AlliedView™-EMS 3.
6.12 AT-9000/24 and AT-9410GB Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.12.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. Tagged Ports This is a list of the tagged member ports of the VLAN. Untagged Ports This is a list of the untagged member ports of the VLAN.
6.12.3 Notes • The current firmware version does not allow VLAN definitions to be created without a VLAN name. As a result, the Add VLAN, Modify VLAN and Import VLAN operations will fail when the VLAN Name field is left blank. • Ports in the Default VLAN cannot be changed from untagged to tagged. • VLAN definitions that only contain tagged ports cannot be deleted. 6 Device Support AlliedView™-EMS 3.
6.13 AT-9400 Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.13.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. Tagged Ports This is a list of the tagged member ports of the VLAN. Untagged Ports This is a list of the untagged member ports of the VLAN. This indicates the status of the VLAN.
6.13.3 Notes • An uplink port must be specified to change the VLAN Mode to "Multiple VLAN" or to "802.1Q Multiple VLAN". Specifying an incorrect port as the uplink port will cause VLAN Manager to lose connection with the device without any warning. Exercise caution. • The current firmware version does not allow VLAN Manager to distinguish Protected VLANs, Mac-based VLANs and standard Port-based VLANs from each other.
6.14 AT-9700 Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.14.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Name Identifier Type Advertisement Tagged Ports Untagged Ports Forbidden Ports Description This is the name of the VLAN. This is the unique identifier of the VLAN. This indicates the type of the VLAN. • 1q_vlan • protocol This specifies that the VLAN is able to join GVRP.
6.14.2 Add/Modify VLAN Dialogs The Add/Modify VLAN Dialogs have the following Input Fields: Input Field Name (cannot be modified) Valid Values If the software release version is 2.03 or lower: • Alphanumeric characters • Other characters except double quote (") If the software release version is 3.
• Deleting a VLAN containing untagged port members that are Forbidden member ports of the Default VLAN will result in the error message “Command: delete vlan Fail!” However, performing a Refresh operation will show that the VLAN was successfully removed. 6 Device Support AlliedView™-EMS 3.
6.15 AT-9800/SwitchBlade Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.15.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Description Name This is the name of the VLAN. Identifier This is the unique identifier of the VLAN. Tagged Ports This is a list of the tagged member ports of the VLAN. Untagged Ports This is a list of the untagged member ports of the VLAN.
6.15.2 Add/Modify VLAN Dialogs The Add/Modify VLAN Dialogs have the following Input Fields: Input Field Valid Values - Alphanumeric characters - Underscore ("_") - Dash ("-") Name (cannot be modified) Identifier (cannot be modified) Note - VLAN names must contain at least one (1) alphabet character. Note - "ALL" is a reserved word and cannot be used as a VLAN name. • 1 - 4090 (AT-9800 Series) • 1 - 4078 (SwitchBlade Series) Length 1 - 15 characters If the software release version is 2.7.
6.16 AT-9900s/AT-x900-24X Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.16.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Name Identifier Operation Mode Type Tagged Ports Untagged Ports Uplink Port Private Ports Core Ports Customer Ports Status Description This is the name of the VLAN. This is the unique identifier of the VLAN. This indicates the operation mode of the VLAN.
6.16.2 Add/Modify VLAN Dialogs The Add/Modify VLAN Dialogs have the following Input Fields: Input Field Name (cannot be modified) Identifier (cannot be modified) Valid Values - Alphanumeric characters - Underscore ("_") - Dash ("-") Note - VLAN names must contain at least one (1) alphabet character. Note - "ALL" is a reserved word and cannot be used as a VLAN name. 1 - 4094 • Operation Mode (cannot • be modified) • Normal Private Nested Length 1 - 32 characters - 6.16.
• When adding/modifying a Nested VLAN, specifying 2 or more core ports where one of the specified ports is already a member of an existing Nested VLAN will result in the error message: "Must return port to the default VLAN as untagged port based." 6 Device Support AlliedView™-EMS 3.
6.17 AT-RG600 Series Topics: • • • VLAN Information Window Add/Modify VLAN Dialogs Notes 6.17.1 VLAN Information Window The VLAN Information Window displays the following attributes for each VLAN definition: Column Name Name Identifier Tagged Ports Untagged Ports Priority Status Description This is the name of the VLAN. This is the unique identifier of the VLAN. This is a list of the tagged member ports of the VLAN. This is a list of the untagged member ports of the VLAN. This indicates the 802.
Input Field Priority (cannot be modified) Valid Values • 0-7 Length - Note - This field is implemented as a dropdown list. 6.17.3 Notes • The current firmware does not allow the deletion of a VLAN whose name starts with a number. • Any attempt to remove untagged ports from the default VLAN will simply be ignored. On the other hand, tagged ports that are removed from the default VLAN are automatically converted to untagged ports.
© 1998-2007 Allied Telesis K. K. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, K. K. Microsoft is a registered trademark of Microsoft Corporation. Netscape Navigator is a registered trademark of Netscape Communications Corporation. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesis K. K.
