User Manual

Property
Name
Description Valid Values
Size tolerance for the
Minumum Bandwidth, or
for the Maximum
Bandwidth when the
Minimum Bandwidth is
none.
one the following formats:
• 0-16777216 bytes
• 0~16384 KB (decimal point
supported)
• 0~16 MB (decimal point
supported)
• 0~0.015628 GB (decimal point
supported)
Note - Byte measures can have the value
b,k,kb,m,mb,g,gb (case insensitive)
Premarking Specifies the QoS action
to take on the traffic class
before bandwidth
metering is applied.
• USEMARKVALUE
• USEDSCP
• none
Remarking Specifies the action to
take after the metering
stage.
• USEDSCPMAP
• BWCLASS
• none
Storm
Status
Determines whether or
not Storm Protection is
enabled for the default
traffic class.
• enabled
• disabled
Storm
Window
Specifies the time
between the polling of
traffic class counters that
checks whether storm
protection should be
activated. Required when
storm protection is
enabled.
This value can be set by entering a
number from 100-60000.
This value can also be set to "none".
Storm Rate Storm protection is
activated when this rate of
traffic is exceeded.
Required when storm
protection is enabled.
This value can be set by entering a value
from 1Kbps up to 10Gbps.
The value may contain decimal fractions
up to 3 decimal places.
This value can also be set to "none".
Storm
Action
Specifies the action QoS
takes when a storm is
detected on a port.
• PORTDISABLE
• LINKDOWN
• VLANDISABLE
Storm
Timeout
Specifies the length of
time the port remains
disabled after a storm is
This value can be set by entering a
number from 1-86400.
This value can also be set to "none".
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 97 of 128