User Manual

Property
Name
Description Valid Values
• SENDMIRROR
• SENDMIRROR,SENDVLANPORT
• SENDVLANPORT
Default
Traffic
Class Drop
Bandwidth
Class3
Determines whether or
not to drop frames
exceeding the default
traffic class maximum
bandwidth setting.
• yes
• no
Default
Traffic
Class
Ignore
Bandwidth
Class3
Determines whether or
not the metering stage
acknowledges any
previous bandwidth class
assigned to flows
processed by the default
traffic class.
• yes
• no
Default
Traffic
Class Max
Bandwidth
Specifies the maximum
bandwidth available to the
default traffic class.
This can be set by entering a value using
one the following formats:
• 0-16000000 kbps
• 0-16000 Mbps (decimal point
supported)
• 0-16 Gbps (decimal point
supported)
• none
Default
Traffic
Class Max
Burst Size
Specifies the burst
tolerance for the default
traffic class maximum
bandwidth parameter.
This can be set by entering a value using
one the following formats:
• 0-16777216 bytes
• 0~16384 KB (decimal point
supported)
• 0~16 MB (decimal point
supported)
• 0~0.015628 GB (decimal point
supported)
Note - Byte measures can have the value
b,k,kb,m,mb,g,gb (case insensitive)
Default
Traffic
Class Min
Bandwidth
Specifies the minimum
bandwidth reserved for
the traffic class.
This can be set by entering a value using
one the following formats:
• 0-16000000 kbps
• 0-16000 Mbps (decimal point
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 77 of 128