User Manual

Property
Name
Description Valid Values
Class acknowledges any
previous bandwidth class
assigned to flows
processed by the default
traffic class.
• YES
Mark Value Specifies an explicit value
to use as an index into the
DSCPMAP table when the
premarking parameter is
usemarkvalue.
• 0-63
• none
Maximum
Bandwidth
Specifies the maximum
bandwidth available to the
traffic class.
This can be set by entering a value using
one the following formats:
• 0-16000000 kbps
• 0-16000 Mbps (decimal point
supported)
• 0-16 Gbps (decimal point
supported)
• none
Max Burst
Size
Specifies the burst
tolerance for the
Maximum Bandwidth
parameter.
This can be set by entering a value using
one the following formats:
• 0-16777216 bytes
• 0~16384 KB (decimal point
supported)
• 0~16 MB (decimal point
supported)
• 0~0.015628 GB (decimal point
supported)
Note - Byte measures can have the value
b,k,kb,m,mb,g,gb (case insensitive)
Minimum
Bandwidth
Specifies the minimum
bandwidth reserved for
the traffic class.
This can be set by entering a value using
one the following formats:
• 0-16000000 kbps
• 0-16000 Mbps (decimal point
supported)
• 0-16 Gbps (decimal point
supported)
• none
Min Burst Specifies the burst This can be set by entering a value using
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 74 of 128