User Manual

Property Name Description Valid Values
Description Specifies a brief description of
the Flow Group.
To set this value, enter an
alphanumeric string from 1-15
characters.
Mark Value Specifies a replacement value
to write into the DSCP (TOS)
field for all packets.
Range: any, 0-63
Priority Specifies the priority that
traffic belonging to this Flow
Group has.
Range: none, 0-7
Remark
Priority
Specifies whether the value of
the priority parameter is used
to set the egress queue
selection for a frame and also
to replace the 802.1p priority
value in the frame, or just to
select the egress queue for the
frame.
• yes
• no
Type of Service Specifies the replacement value
to write in the Type of Service
field of IPv4 packets.
Range: none, 0-7
Move TOS to
Priority
Specifies whether or not the
value in the 802.1p priority field
will be replaced with the value
in the ToS priority field on IPv4
packets.
• yes
• no
Move Priority
to TOS
Specifies whether or not the
value in the ToS priority field
will be replaced with the value
in the 802.1p priority field on
IPv4 packets.
• yes
• no
Classifier List Specifies a list of the Classifiers
currently assigned to this Flow
Group.
Select from a list of available
classifier IDs.
6.5.3 Traffic Classeses
6.5.3.1 QoS Information Window
Column Name Description
Traffic Class ID Lists the ID of Traffic Classes available
Description A brief description of the Traffic Class
Flow Groups List of the Flow Groups associated with this
Traffic Class
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 57 of 128