User Manual

Property
Name
Description Valid Values
This can also be set to "any".
Ethernet
Format
Specifies the Ethernet
encapsulation type of the
packet.
• EthII-Untagged
• EthII-Tagged
• 802.2-Untagged
• 802.2-Tagged
Priority Specifies the priority level of a
tagged Ethernet frame.
Range: 0-7
VLAN Specifies the VID number and
name of a tagged or port-based
VLAN.
This can be set by selecting
from a list of available VLANs
or "any"
Protocol Specifies the protocol specified
in the Ethertype field of the
MAC header in an Ethernet
frame.
This can be set by selecting any
of the following values:
• IP
• ARP
• RARP
This can also be set by entering
an integer from 1-255.
IP Type of
Service
Specifies the value of the
precedence field within the
TOS (Type of Service) byte of
an IP packet.
Range: 0-7
IP DSCP Specifies the Code Point bits of
the DiffServ field of an IP
packet.
Range: 0-63
IP Protocol Specifies the Layer 3 protocol
type.
This can be set by selecting any
of the following values:
• TCP
• UDP
• ICMP
• IGMP
This can also be set by entering
an integer from 1-255.
Source IP
Address
Specifies the source IP Address
(either host or host/subnet) of
an IP packet.
This can be set by entering an
IP Address in dotted decimal
notation with an optional mask
• NNN.NNN.NNN.NNN
• NNN.NNN.NNN.NNN/M
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 55 of 128