User Manual

Property
Name
Description Valid Values
• UDP
• ICMP
• IGMP
• any
This can also be set by entering
an integer from 0-255.
IP Type of
Service
Specifies the value of the
precedence field within the
TOS (Type of Service) byte of
an IP packet.
Range: any, 0-7
Destination
IPX Address
Specifies the destination
network address of an IPX
packet.
This can be set by entering a 4-
byte hexadecimal value.
(00000001-FFFFFFFF)
This can also be set to "any".
IPX Packet Specifies the value of the
Packet Type field of an IPX
packet.
This can be set by entering a 2-
byte hexadecimal value (00-FF)
or selecting from the following:
• NLSP
• RIP
• SAP
• SPX
• NCP
• NETBIOS
• any
Source IPX
Socket
Specifies the source IPX socket
number of an IPX packet.
This can be set by entering a 2-
byte hexadecimal value (0000-
FFFF) or by selecting one of the
following:
• NCP
• SAP
• RIP
• NNB
• DIAG
• NLSP
• IPXWAN
• any
Destination
IPX Socket
Specifies the destination IPX
socket number of an IPX
packet.
This can be set by entering a 2-
byte hexadecimal value (0000-
FFFF) or by selecting one of the
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 46 of 128