User Manual
Property
Name
Description Valid Values
Ethernet
Format
Specifies the Ethernet
encapsulation type of the
packet.
This can be set by selecting any
of the following values:
• 802.2
• 802.2-Tagged
• 802.2-Untagged
• EthII
• EthII-Tagged
• EthII-Untagged
• NetwareRaw
• NetwareRaw-Tagged
• NetwareRaw-Untagged
• SNAP
• any
Source IP
Address
Specifies the source IP Address
(either host or host/subnet) of
an IP packet.
This can be set by entering an
IP Address in dotted decimal
notation with an optional mask
• NNN.NNN.NNN.NNN
• NNN.NNN.NNN.NNN/M
Where M = 0-32
Destination IP
Address
Specifies the destination IP
Address (either host or
host/subnet) of an IP packet.
This can be set by entering an
IP Address in dotted decimal
notation with an optional mask
• NNN.NNN.NNN.NNN
• NNN.NNN.NNN.NNN/M
Where M = 0-32.
IP DSCP This the Code Point bits of the
DiffServ field of an IP packet.
This can be set by entering one
or more integers from 0-63.
Input can be a comma
separated list or a range
(specified as m-n) or a
combination of both. (e.g. 2, 4-
7)
This value can also be set to
"any".
IP Protocol This specifies a Layer 4 IP
protocol of an IP packet.
This can be set by selecting any
of the following values:
• TCP
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 45 of 128