User Manual
6.3 AT-8800 Series
Topics:
• Classifiers
• Flow Groups
• Traffic Classes
• Policies
• Ports
• Scheduling
• Quick Setup
• Notes
6.3.1 Classifier
6.3.1.1 QoS Information Window
Column Name Description
Classifier ID Lists the Rule ID of packet-matching rules
available
6.3.1.2 Add/Modify Classifier
Property
Name
Description Valid Values
Rule ID
(cannot be
modified)
Uniquely identifies the packet-
matching rule
Range: 1-9999
VLAN Specifies the Destination
VLAN that the packet will be
transmitted on.
This can be set by selecting
from a list of available VLANs
or "any".
Egress Port Specifies the egress port on the
switch to match for each
frame.
This can be set by selecting any
of the following values:
• 1-N (where N is the
number of ports available
on the device)
Ingress Port Specifies the ingress port on
the switch to match for each
frame.
This can be set by selecting any
of the following values:
• 1-N (where N is the
number of ports available
on the device)
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 44 of 128