User Manual

Property
Name
Description Valid Values
following:
• NCP
• SAP
• RIP
• NNB
• DIAG
• NLSP
• IPXWAN
• any
Source MAC
Address
Specifies the source MAC
address of the packet.
This can be set by entering a
MAC address string using the
following format:
• XX-XX-XX-XX-XX-XX
This can also be set to "any".
Destination
MAC Address
This parameter specifies the
destination MAC address of the
packet.
This can be set by entering a
MAC address string using the
following format:
• XX-XX-XX-XX-XX-XX
This can also be set to "any".
Match1 Specifies the actual data to
match
This can be set by entering a 2-
byte hex number. (0000-FFFF)
Mask1 Specifies whether the
corresponding bit in the
Match1 parameter is "on" for a
match or "don't care" for a
match.
This can be set by entering a 2-
byte hex number. (0000-FFFF)
Offset1 Specifies the location or offset
where the pattern for Match1
is to be checked.
Range: 0-62
Match2 Specifies the actual data to
match
This can be set by entering a 2-
byte hex number. (0000-FFFF)
Mask2 Specifies whether the
corresponding bit in the
Match2 parameter is "on" for a
match or "don't care" for a
match.
This can be set by entering a 2-
byte hex number. (0000-FFFF)
Offset2 Specifies the location or offset
where the pattern for Match2
Range: 0-62
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 38 of 128