User Manual

Default CoS Specifies the default CoS value
of an interface
Range: 0-7
6.1.3 Scheduling
Setting Description Value
Scheduling Configures the number of
expedite queues. It is used to
specify the scheduling method
to use.
• Strict Priority - higher
priority queues are
emptied before any
packets are transmitted
from lower priority
queues
• Weighted Priority -
packets are transmitted
from all queues in a
round-robin fashion
based on the queue
weights
6.1.4 CoS Priority
Column Name Description Value
Class of Service
(cannot be
modified)
Lists the CoS values available Range: 0-7
Queue Specifies the queue number to
which the CoS value is mapped
Range: 1-4
6.1.5 DSCP Priority
Column Name Description Value
DSCP
(cannot be
modified)
Lists the DSCP values available Range: 0-63
Queue Specifies the queue number to
which the DSCP value is
mapped
Range: 1-4
6.1.6 Bandwidth
Column Name Description Value
Interface
(cannot be
modified)
Lists the interfaces (ports and
channels) available
The available interfaces will
depend on the device model
and configuration.
• standalone - e1, e2..en
• stacked - 1/e1, 1/e2..1/en,
2/e1, 2/e2..s/en
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 33 of 128