User Manual

6.9 SwitchBlade Series
Topics:
• Classifiers
• Flow Groups
• Traffic Classes
• Policies
• Ports
• Scheduling
• Quick Setup
• Notes
6.9.1 Classifiers
6.9.1.1 QoS Information Window
Column Name Description
Classifier ID Lists the Rule ID of packet-matching rules
available
6.9.1.2 Add/Modify Classifier
Property
Name
Description Valid Values
Rule ID
(cannot be
modified)
Uniquely identifies the packet-
matching rule
Range: 1-9999
Source VLAN Specifies the source VLAN that
the packet was associated with
when the packet was received
by the switch.
This can be set by selecting
from a list of available VLANs
or "any".
Destination
VLAN
Specifies the destination VLAN
that the packet will be
transmitted on.
This can be set by selecting
from a list of available VLANs
or "any".
Ethernet
Format
This parameter specifies the
Ethernet encapsulation type of
the packet.
• 802.2
• EthII
• NetwareRaw
• SNAP
• any
Source IP
Address
Specifies the source IP address
(either host or subnet) of an IP
packet.
This can be set by entering an
IP Address in dotted decimal
notation with an optional mask
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 119 of 128