User Manual

Column Name Description Valid Values
Max Packets
Maximum number of packets
able to be transmitted from
this queue before the control is
passed to the next queue.
Range: 0-255
Max Latency
Maximum permissible elapsed
time between packets
transmitted from this queue.
Range: 0, 16-4080
6.8.7 Quick Setup
Property Name Description Valid Values
Source UDP
Port
Specifies the UDP source port
of an UDP/IP packet.
Range: 0-65535 or a port range
(n-m).
Default for VOICE: 1719
Default for VIDEO: 1024
Priority Specifies the priority that will
be assigned for this setup.
Range: none, 0-7
Default for VOICE: 7
Default for VIDEO: 4
Maximum
Bandwidth
Specifies the maximum
bandwidth available to this
setup.
• 0-16000000 kbps
• 0-16000 Mbps (decimal
point supported)
• 0-16 Gbps (decimal point
supported)
Default for VOICE: 128kbps
Default for VIDEO: 256kbps
Port
Assignment
Specifies a list of ports that will
be affected by this setup.
Select from a list of available
Ports.
Default for VOICE: no ports
Default for VIDEO: no ports
6.8.8 Notes
• The current firmware version does not allow the Ingress Interface
classifier property to be set to 'none'.
• The current firmware version only allows values in the range [0-255]
inclusive for the ICMP Type and ICMP Code classifier properties.
• Values entered for the Max Bandwidth traffic class property are rounded
to the nearest 1000kbps.
• Valid values for the PPP Index classifier property are in the range [0-1024]
inclusive for the CLI and [0-1023] inclusive for QoS Manager. As such,
setting a classifier's PPP Index property to 1024 using the CLI will result
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 117 of 128