Owner's manual

AlliedView™-EMS 3.10 Device Management Guide Page 287 of 367
Note - The following parameters are not applicable to the AT-x900-24X series and
should be ignored:
• Capability Bits
• Advertised Bits
• Received Bits
• Remote Fault Advertised
• Remote Fault Received
Note - The Administration Status, Advertised Negotiation Capability and Restart
parameters are implemented as 'read-only'.
Port Trunking
Aggregator Port LIst
Displays Link Aggregation Control information for every Aggregation Port
associated with this device.
Note - Valid MIB Set values for the Actor System Priority and Actor Port Priority
parameters are in the range [0..65535] inclusive.
Note - The following parameters are implemented as 'read-only':
• Actor Operational Key
• Partner Administrative System Priority
• Partner Administrative System ID
• Partner Administrative Key
• Partner Administrative Port
• Partner Administrative Port Priority
• Actor Administrative Status
• Partner Administrative Status
LACP Statistics
Displays Link Aggregation information for every port that is associated with this
device.
LACP Debug
Displays Link Aggregation debug information for every port that is associated with
this device.
Enable
Enables the port.
Disable
Disables the port.
AT-x900-24X Series