User's Manual

AT-GS950/48PS Switch Web Interface User’s Guide
143
Ingress Rate
Limiting
The Ingress Rate Limiting feature restricts the traffic to a pre-configured
data rate that can flow into a port. This data rate limit can be configured in
64 Kbps increments within a range from 64 Kbps to 1000 Mbps. The
formula for calculating the bandwidth limit is as follows:
Bandwidth = 64Kbps x rate limit
The rate limit parameter is an integer ranging from 1 to 15625.
Egress Rate
Limiting
The Egress Rate Limiting feature restricts the traffic to a pre-configured
data rate that can flow out of a port. This data rate limit can be configured
in 64 Kbps increments within a range from 64 Kbps to 1000 Mbps. The
formula for calculating the bandwidth limit for the 10/100/1000Base-T ports
is as follows:
Bandwidth = 64Kbps x rate limit
The rate limit parameter is an integer ranging from 1 to 15625.