User's Manual

Chapter 1: Overview

LEDs

Here are descriptions of the switch LEDs.

System LEDs There are two system LEDs, the Power (PWR) LED and System (SYS)

LED, as shown in Figure 8.

Figure 8. Power and System LEDs

The system LED states are described in Table 4.

RJ-45 Port LEDs

& MODE LED

SELECT Button

The RJ-45 port LEDs are illustrated in Figure 9.

Figure 9. RJ-45 Port LEDs

On each port, the left LED indicates the Link status.

Depending on the switch, the right LED indicates the status as follows:

 AT-9000/12POE: PoE. The AT-9000/12POE does not have a

MODE LED SELECT button.

Table 4. System LED States

LED State Description

Power Green System is powered up (power on)

Off System is not powered up (power off)

SYS Green System is operational

Link Mode/PoE