User's Manual

Chapter 2: Beginning the Installation
47
Reviewing Safety Precautions
Review the following safety precautions before you begin to install the
switch or any of its components.
Note
The  indicates that a translation of the safety statement is
available in a PDF document titled “Translated Safety Statements”
posted on the Allied Telesis website at www.alliedtelesis.com.
Note
Refer to the data sheet about an SFP module at
www.alliedtelesis.com to determine whether it is a Class 1 LED or
a Class 1 Laser product.
Warning
Class 1 Laser product.  L1
Warning
Do not stare into the laser beam.  L2
Warning
Class 1 LED product.  L3
Warning
To prevent electric shock, do not remove the cover. There are no
user-serviceable parts inside. This unit contains hazardous voltages
and should only be opened by a trained and qualified technician. To
avoid the possibility of electric shock, disconnect electric power to
the product before connecting or disconnecting the LAN cables.

E1