Installation and Operation Manual
SIGALARM INSTALLATION AND OPERATION MANUAL / GENERATION 4 WIRELESS / VERSION 4.2
8
2.4. CONNECTING THE CONTROL MODULE TO A POWER SOURCE
Attach the supplied power cable (2.0pwr) to a 12v to 48v DC power supply. The
2.0pwr cord has a red wire, black wire, and a white wire. It can be installed one of
two ways.
SWITCH POWER (Recommended)
Red (Pin 1) Positive -always on 12-48v DC
White (Pin 2) Switched power
Black (Pin 3) Negative -ground
POWER
Red (Pin 1) Positive - always on 12-48v DC
White (Pin 2) Twist together with Red
Black (Pin 3) Negative - ground
Front view of 2.0-pwr
12
3