Installation and Operation Manual
7
SIGALARM INSTALLATION AND OPERATION MANUAL / GENERATION 4 WIRELESS / VERSION 4.2
2.1 STANDARD PACKING LIST
2.2 INSTALLATION PRECAUTIONS
ΖW LV KLJKO\ UHFRPPHQGHG WKDW 6LJDODUP SURGXFWV DUH LQVWDOOHG E\ D FHUWLȴHG
Sigalarm installer or competent person. Prior to the use of Sigalarm products,
WUDLQLQJVKRXOGEHJLYHQWRWKHRSHUDWRUE\DFHUWLȴHGWUDLQHURUFRPSHWHQWSHUVRQ
Always test the installation at a safe distance from high voltage power lines. Use
extreme care and a spotter while testing this equipment.
2.3 INSTALLATION OF THE CONTROL MODULE; SIGALARM WCM4.0
The main component of the Sigalarm system is the control module WCM4.0. It
should be mounted in the immediate vicinity of the operator in plain view, without
obstructing their view of the work area.
Systems with an IP rating will be clearly marked. If your control
module does not have an IP rating displayed, do not assume it
is waterproof.
2. INSTALLATION
Part # QTY Description
WCM4.0 1 Control Module
WS4.0 1-16 Sensor(s)
7315-w 1 Parts Bag
WPASPC-5P 1 Horn
2.0wrly 1 Relay Cable
2.0spk 1 Speaker Cable
2.0pwr 1 Power Cable
727-04 1 Mounting Bracket