Installation and Operation Manual

25
SIGALARM INSTALLATION AND OPERATION MANUAL / GENERATION 4 WIRELESS / VERSION 4.2
3.13 MANAGE DEVICES (COMING SOON)
Item Action Screen
5 Manage Devices Icon Synch key fob (optional)
4.1 INITIAL CONTROL MODULE SET UP
Before the equipment is operated near power lines, the following control module
set up must be completed.
A. Display settings
I. Adjust brightness
II. Adjust volume
III. Select default page layout preference
B. Setup Defaults
I. Select Language preferences (Coming Soon)
C. Manage sensors
I. Add or remove sensors as necessary
II. Verify pairing
D. Manage Devices
I. Verify key fob status (Coming Soon)
4. GETTING STARTED
5.1 WARNINGS
The operator must fully understand how the Sigalarm system functions, and its
limitations before use. It is dangerous to operate any equipment directly beneath
or above high voltage power lines. Never approach any power line closer than the
minimum safe distance set by OSHA. If multiple lines are present the Sigalarm
system should be set to the lowest voltage line, and additional precautions may
be required.
5. OPERATION