Installation and Operation Manual

19
SIGALARM INSTALLATION AND OPERATION MANUAL / GENERATION 4 WIRELESS / VERSION 4.2
3.6 TOUCH SCREEN ICONS
3.7 BUTTONS AND KNOBS
Item Tool Bar Function
5 Override The override icon can be selected in a danger state.
This will put the unit in a warning state for 15 second
countdown to allow the operator to move away from
danger
*This is especially important when the auto shutdown
feature is utilized*
6 Decrease Decreases the setpoint
7 One touch Matches the setpoint to the current highest sensor
UHDGLQJSOXVȴYH
8 Increase Increases the setpoint
9 Reset After power is applied reverts unit to last setpoint
Item Button/knobs Function
8a + Increases setpoint
6a - Decreases setpoint
10 Enter N/A
9a Reset • After power is applied reverts unit to last setpoint.
Depressing the reset button for 15 seconds will reboot
the system, known as a hard reset.