Installation manual

Updating the firmware in the CopperJet 81x.
With the CopperJet configurator you can upload a new firmware into your CopperJet 81x.
New firmware will be available on our website.
Note: Don’t disconnect the power suply, USB cable or Ethernet cable during the upload.
1. Start the CopperJet Configurator.
2. Click on the MAC address,
and click on Update firmware.
3. Select the binary to upload,
and click on Open.
Allied Data Technologies42
CopperJet 81x
CJT 81x 02-10-2001 11:45 Pagina 42