Installation manual

3. Fill in your Subnet and Netmask.
The Subnet must be in the same
network as your CopperJet 81x
IP Address, and click on OK.
4. Fill in the range of IP Addresses
you want to use, and click on Add.
Note: Do not use the CopperJet 81x
IP Address in your IP range.
5. Fill in the Default or Max. lease
time, this is the time in seconds
you have the assigned IP Address,
after this time you get a another
IP Address from the DHCP Server.
Allied Data Technologies36
CopperJet 81x
CJT 81x 02-10-2001 11:45 Pagina 36