Installation manual

Configuring PPTP.
1. Select PPTP as profile type and
click on OK.
2. Set the LAN TCP/IP parameters.
(CopperJet 81x IP-Address).
The Default Gateway of your local
network will be the CopperJet 81x
IP-Address
Set the interface type.
USB when the CopperJet 81x is
connected with a USB cable.
Ethernet when the CopperJet 81x
is connected with a Ethernet
cable.
Select the Line modulation.(ADSL connection Protocol)
-Multimode : Modem will detect the Modulation offered by the CO (Preferred)
-T1.413 : ANSI ADSL Standard
-G.Lite : G.992.2
-G.Dmt : G.992.1 Annex A
Set the ATM PVC (Virtual Circuit) parameters.
-VPI :VPI Channel Number
-VCI :VCI Channel Number
DNS Relay.
Fill in the DNS server IP-Address, in your local network the DNS IP-Address will be the
CopperJet 81x IP address.
Allied Data Technologies 31
CopperJet 81x
CJT 81x 02-10-2001 11:45 Pagina 31