Installation manual

You must set NAT when de LAN IP-Address differs from the WAN IP-Address.
Set Routing default gateway if needed.(CopperJet 81x WAN IP-Address)
DNS Relay.
Fill in the DNS server IP-Address, in your local network the DNS IP Address will be the
CopperJet 81x IP address.
Set the DHCP server when needed.
The CopperJet 81x can act as a DHCP server.
Go to the DHCP server section how to configure the DHCP server.
Click on OK when finished, the profile will be stored in My Documents.
The profile can be uploaded to the Copperjet 81x as described in the upload section.
Allied Data Technologies26
CopperJet 81x
CJT 81x 02-10-2001 11:45 Pagina 26