Installation manual

Chapter 2: LED Indicators and back panel
2 LED Indicators and back panel
Before you begin with the installation, please take a moment to become more familiar with
the LED indicators and back panel of the CopperJet.
Page 5
2.1 CopperJet 16xx series LED indicators
et to the
Ethernet port on the PC or hub/switch.
DN: the CopperJet to the ISDN phone (BRI).
ing. Illuminates
Power
ADSL
USB
Ethernet
Front panel
1610
Power
ADSL
Ethernet
Front panel
1612
Power
ADSL
ISDN 1
Ethernet
ISDN 2
Front panel
1614-1B
1624-2BRI
Front panel
1
234
Power
ADSL
1
234
EthernetUSB
ISDN
Power
ADSL
Phone 1
Ethernet
Phone 2
Front panel
1616-2P
1234
PowerUSB ADSL
1614-2B
Eth
Front panel
ISDN
1626-4P
Front panel
1
234
Power ADSL
1
234
EthernetUSBPhone
1620
Front panel
1
23
Power ADSL
1
234
EthernetUSB
Power
ADSL
Front panel
1622
Eth 1 Eth 2 Eth 4 Eth 3
Ethernet/ETH: The Ethernet led will illuminate when you connect the CopperJ
USB: The USB led will illuminate when you connect the CopperJet to the USB port
on the PC.
P
hone: To connect the CopperJet to the analogue phone (PSTN).
To connect
IS
ADSL: Blinking indicates that the ADSL protocols starts handshak
when the ADSL network is correctly configured and connected.
Power: When the CopperJet is connected to a power source, the Power LED will
illuminate.