Installation manual

Chapter 5: Configuring the CopperJet
5.18 Configuring VoIP
VoIP enables telephone calls to be made over an IP network. This enables DSL Service
providers to sell telephone services over DSL to customers without the expense of
providing any extra physical connections to the consumer, or network infrastructure in
addition to their existing IP network.
From the Configuration menu, go to VoIP. The VoIP Configuration page is displayed.
Select the Caller ID Region that applies to your country.
Available regions are:
• US
• JAPAN
• UK
• China
• Europe
• Netherlands
When you select a Signal Protocol (SIP or MGCP) and click on the Apply button, the
necessary fields for that protocol comes available.
You can select SIP or MGCP. For configuring SIP, go to section
5.18.1 Configuring VoIP
using SIP
. For configuring MGCP, go to section 5.18.2 Configuring VoIP using MGCP.
Page 64