Installation manual

Chapter 5: Configuring the CopperJet
1. Click on the New IP interface drop-down list and select an interface.
2. Click Add.
5.12.3 Adding a DHCP server to the DHCP relay list
1 In the Add new DHCP server section, type an address in the New DHCP server IP
address text box.
2 Click Apply. The address is displayed in the Edit DHCP server list section.
5.12.4 Editing/deleting entries in the DHCP relay list
1 To edit an entry, click on an IP address and type a new entry, then click Apply.
2.To delete an entry, check the Delete? box for a specific IP address, then click Apply.
5.13 Configuring DNS client
The DNS client enable the CopperJet to resolve IP addresses from external DNS Servers.
To manually configure DNS client, go to the Configuration menu and select DNS client.
The DNS client page is displayed:
5.13.1 Configuring DNS servers
1 Type the IP address of the unknown domain name in the DNS servers: text box.
Click Add. The IP address appears in the DNS servers table. You can add a maximum of
5.13.2 Configuring DNS search domains
1 Type a search string in the Domain search order: text box.
Click Add. The search string is displayed in the Domain search order table. You can add a
5.14 Configuring DNS Relay
DNS Relay allows you to send DNS requests to the CopperJet instead of the DNS servers at
2
three server IP addresses. Each IP address entry has a Delete button associated with it.
Click on Delete to remove an IP address from this list.
2
maximum of six search strings. Each search string entry has a Delete button associated
with it. Click on Delete to remove a string from this list.
the service provider. The CopperJet relays these requests to specified DNS Servers.
Page 52