Installation manual

Chapter 5: Configuring the CopperJet
Click on the Option name drop-down list and select a name. Type a value that matches the
lected option name in the Option value text box. Click on OK.
delete an existing
ption, check the Delete? box for a specific option and click OK.
he
ting a fixed host
To create a fixed host click on Create new Fixed Host…. The Create new DHCP server fixed
layed.
se
The Edit DHCP server subnet page is displayed, and details of your new option are
displayed under the sub-heading Additional option information. To
o
Go to the Configuration menu and click on Save config to save the new settings into t
CopperJet.
5.11.2 Crea
host IP/MAC mapping page is disp
Complete the following:
Type in the IP address that will be given to the host with the specified MAC address.
Type in the MAC address and the maximum lease time (default is 86400 seconds).
Click on OK. The DHCP Server page is displayed, and details of your new fixed host are
d
mapping, click on the IP address, MAC address or max lease time, type a new entry and
G
C
1
2
3
displayed under the sub-heading Existing DHCP fixed IP/MAC mappings. To edit a fixe
click Apply. To delete a fixed mapping, check the Delete? Box for a specific mapping and
click Apply.
o to the Configuration menu and click on Save config to save the new settings into the
opperJet.
Page 49