Installation manual

Chapter 5: Configuring the CopperJet
Page 15
5.3.4 Configuring DHCP Server
DHCP allows you to dynamically assign IP address to the computers connected to
the Ethernet or USB interface of the CopperJet. The CopperJet allows multiple
DHCP Servers for multiple IP subnets. Usually, you would only require 1 DHCP
Server.
This option allows you to enable, disable and configure the DHCP server on your
CopperJet. By default, the DHCP Server is disabled.
5.3.4.1 Enabling DHCP Server
To enable the DHCP Server, go to the Configuration menu and select DHCP
server.
The DHCP Server page is displayed.