Service manual

17 800168
Section 3 Troubleshooting
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
WARNING
SERVICE PROCEDURE: WORN BRUSHES
a. Remove motor from washer. Refer to Paragraph 58.
b. Using a flashlight, view brushes through holes in motor end shield. Refer to Figure 13.
c. Inspect both brushes to determine if either brush is worn. Refer to Figures 13 and 14.
d. Replace worn brushes with 738P3 Motor Brush Kit. Follow instructions provided in kit.
Figure 13
FLW1648S
Brush
Spring
GOOD BRUSH
– Has visible amount of
brush material remaining.
Brush
Holder
Brush
FLW1648S