Service manual

14 800168

Section 3 Troubleshooting

To reduce the risk of electric shock, fire, explosion, serious injury or death:

• Disconnect electric power to the washer before servicing.

• Never start the washer with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer is properly grounded.

W003

WARNING

Figure 10

H006BE3A

Out-Of-Balance

Switch

Ballast

Weight

1-1/2

Inches

Left

Front

Shock

Tape

Washer

Base

Wire

Harness

(8 inch slack)

Plastic

Wire

Retainer