Service manual

800168 9

To reduce the risk of electric shock, fire, explosion, serious injury or death:

• Disconnect electric power to the washer before servicing.

• Never start the washer with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer is properly grounded.

W003

WARNING

Section 3

Troubleshooting

1. TROUBLESHOOTING COIN DROP

a. Non-Electronic Coin Drops:

When coin is placed into coin slot, the coin

should roll down drop and be heard dropping into

coin vault. If coin does not fall into coin vault or

if coin drop sensor does not register that coin has

been entered, follow troubleshooting instructions

on following page. Refer to Figure 1 for path that

coin follows when working properly.

IMPORTANT: Never use oil to correct coin drop

problems. Oil residue will prevent coins from

rolling properly.

IMPORTANT: Do not bend or damage mechanical

parts within coin drop.

Figure 1

DRY2B

Additional coins

following path to

sensor

Coin Drop

Sensor

Coin in

Coin Slot