Specifications

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
802734ENR7
18
NOTE: If more switch down-force is required,
install lever with arm that has two stars facing
down to provide additional switch travel.
3. Install extension lever with rounded corner
facing away from extension bracket using bolt,
washer and nut. Refer to Figure 22.
4. Install spring to extension bracket with hook
facing down. Install other end of spring to
extension lever with hook facing left while
standing in front of unit. Refer to Figure 22.
5. Install extension bracket and lever assembly onto
coin slide bracket using two screws and locknuts.
Refer to Figure 23.
IMPORTANT: Install coin slide bracket with side
marked "A" facing up and toward extension
bracket and lever assembly. Refer to Figure 23.
6. Install coin slide extension assembly onto top of
coin slide using two remaining screws and
lockwashers. Refer to Figure 24.
TLW1610K
Figure 22
TLW1610K
Extension
Bracket
Bolt
Washer
Extension
Lever
Nut
Rounded
Corner
Spring
Figure 23
Figure 24
Coin Slide Bracket -
Letter "A"
Extension Bracket and
Lever Assembly
TLW2163N
Spring
Installed
Coin Slide Extension
Assembly
TLW2164N
Spring Installed