Service manual

94 801681

Section 5 Service Procedures

To reduce the risk of electric shock, fire, explosion, serious injury or death:

• Disconnect electric power to the washer before servicing.

• Never start the washer with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer is properly grounded.

• Motor not grounded! Disconnect electric power before servicing motor.

W485

WARNING

44. LOADING DOOR

a. Unlatch and open loading door.

b. Remove door bezel by removing screws

holding door bezel to inner door and glass.

Refer to Figure 36.

c. While supporting loading door, remove screws,

lockwashers and nuts holding loading door to

hinge assembly and remove door. Refer to

Figure 36.

Figure 36

H212SE1A

Door Bezel

Attaching

Screw

Inner

Door and

Glass

Door

Bezel

Hinge

Assembly

Nut

Lockwasher

Door

and

Glass

Screw