Service manual

801681 73

Section 5 Service Procedures

To reduce the risk of electric shock, fire, explosion, serious injury or death:

• Disconnect electric power to the washer before servicing.

• Never start the washer with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer is properly grounded.

• Motor not grounded! Disconnect electric power before servicing motor.

W485

WARNING

p. Lift front of cabinet top slightly and pull

forward to disengage from rear hinges.

q. Pull top forward far enough to permit

disconnecting ground wires from top rear

corner gusset of washer cabinet.Refer to

Figure 21.

r. Disconnect wires from mixing valve solenoids

at rear of washer.

NOTE: Refer to appropriate wiring diagram when

rewiring mixing valve solenoids.

s. Carefully lift cabinet top off washer and set on

protective padding.