Service manual

12 801681

Section 3 Troubleshooting

To reduce the risk of electric shock, fire, explosion, serious injury or death:

• Disconnect electric power to the washer before servicing.

• Never start the washer with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer is properly grounded.

• Motor not grounded! Disconnect electric power before servicing motor.

W485

WARNING

3. TROUBLESHOOTING COIN DROP

When coin is placed into coin slot, the coin should

roll down drop and be heard dropping into coin

vault. If coin does not fall into coin vault or if coin

drop sensor does not register that coin has been

entered, follow troubleshooting instructions on

following page. Refer to Figure 1 for path that

coin follows when working properly.

IMPORTANT: Never use oil to correct coin drop

problems. Oil residue will prevent coins from rolling

properly.

IMPORTANT: Do not bend or damage mechanical

parts within coin drop.

Figure 1

DRY2B

Additional coins

following path to

sensor

Coin Drop

Sensor

Coin in

Coin Slot