Service manual

801681 115

Section 6 Adjustments

To reduce the risk of electric shock, fire, explosion, serious injury or death:

• Disconnect electric power to the washer before servicing.

• Never start the washer with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer is properly grounded.

• Motor not grounded! Disconnect electric power before servicing motor.

W485

WARNING

57. SHIPPING BRACES

All frontload washers, when shipped from the

factory are equipped with two factory installed

shipping supports. DO NOT remove this shipping

material until after washer is placed in its final

installed position. Refer to Figure 48.

IMPORTANT: DO NOT tip or move washer once

these supports have been removed. Removal of

supports prior to final installation may cause

damage to the shock absorbers and will VOID the

product warranty.

NOTE: Shipping supports MUST be kept for

future re-positioning or moving of the washer.

Figure 48

FLW821S

Shock

Absorber

Shipping

Support

Shock

Absorber

Shipping

Support

Shipping

Bracket