Service manual

112 801681

Section 6 Adjustments

To reduce the risk of electric shock, fire, explosion, serious injury or death:

• Disconnect electric power to the washer before servicing.

• Never start the washer with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer is properly grounded.

• Motor not grounded! Disconnect electric power before servicing motor.

W485

WARNING

54. LOADING DOOR

a. Open loading door.

b. Remove door bezel to gain access to nuts. Refer

to Figure 45.

c. The loading door can be adjusted up or down

somewhat by loosening screws holding door to

hinge, then raise or lower door before

retightening screws. Refer to Figure 45.

Figure 45

Door Bezel

Attaching Screw

Door

Bezel

Inner Door

and Glass

H212SE1B

Door

Attaching

Screw

Nut

Lockwasher

Inner

Door

and

Glass

Hinge

Assembly