Service manual

803402 43

Adjustments

To reduce the risk of electric shock, fire, explosion, serious injury or death:

• Disconnect electric power to the washer before servicing.

• Never start the washer with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer is properly grounded.

• Motor not grounded! Disconnect electric power before servicing motor.

W485

WARNING

21. Loading Door

a. Open loading door.

b. The loading door can be adjusted up or down

somewhat by loosening screws holding door

hinge to front panel, then raise or lower door

before retightening screws. Refer to Figure

13.

Figure 13

FLW1771S

Hinge

Door

Screw