Manual

ast install the shipping brace and shipping
any time the washer is moved.
Brace
The shipping brace in the lid opening should
be saved and reinstalled whenever the
washer is moved. To reinstall the brace, o
the washer lid and place the brace over the
washer agitator, placing the back of the
into the washtub first.
_e
nt
da to
accomplish pping plug opening
must be directly lined up with the base
opening. Refer to illustrations below.
After the shipping brace has been installed in
the lid opening, tilt washer back enough to
access base opening.
Insert shipping plug into base opening and,
using the palm ofyour hand, push shipping
_'plug into washer until it snaps into shipping
_plug opening.
Overload Protector
e internal motor overload protector will
op the motor automatically if there are
many clothes in the washtub or ifa
has occurred within the machine. The
overload protector will reset itself in two or
three minutes and the motor will restart
automatically. If the overload protector
stops the motor again, remove the washer
from use and call the service person to
correct the problem.
Shipping
Brace
Shipping
Plug Opening
Base
Opening
Shipping
Plug
TLW2044N