Manual

Use Tips
_enser housing from agitator by • Fabric softener spilled onto garments may
..... II
the lower part of the dispenser, pulling ...... cause staining. To remove, dampen stain and
ly upward and at the same time tilting rub with bar soap. Wash as usual.
This will expose the dispenser cup, which
_lso removable, for cleaning (refer to
Jstration). Both housing and cup can be
hot soapy water and rinsed clean. The funnel
ape in top of agitator also needs to be
hole and the slots in the two rings will rec
a small brush for proper cleaning.
:r cleaning, install dispenser cup, then push
:nser housing directly downward onto top
mtil firmly snapped together.
Dispenser Housing
•. Liquid fabric softeners will be dispensed
during the final rinse and should not be
combined with bleach, bluing, starch,
_etergents, soaps or packaged water
cioners.
softener is not to be used in
ispenser when using Prewash cycle, if
vailable.
_/hen adding detergent to wash water, do
not allow any to enter into softener
dispenser cup, as softener will become
gummy.
Dispenser Cup
To prevent softener buildup, the dispenser can be
filled with clean water for automatic cleaning. This
can be done in washing cycles other than when
softener is used.
Agitator
TLW2001N
-14-
201472