Specialty Gases + World-Class Performance Specialty Gases & Equipment Catalog
Table Of Contents Pure Gases Acetylene .................................................... 2 Air ............................................................... 3 Ammonia .................................................... 4 Argon .......................................................... 5 Carbon Dioxide ........................................... 6 Carbon Monoxide ....................................... 7 Carbonyl Sulfide ......................................... 8 Chlorine .............................
Pure Gases TM Acetylene A colorless, highly flammable gas. Shipping Information: Technical Information: Chemical Symbol: C2H2 DOT/TC Proper Name: Acetylene Hazard Class: 2.1 Molecular Weight: 26.04 Specific Volume 14.7 ft /lb (0.91 m /kg) 3 I.D. Number: UN 1001 3 CAS Registry Number: 74-86-2 Grade Labels: Flammable Gas Purity Impurity Maximum Equipment Recommended 99.6% Oxygen plus CH4 PH3 4000 ppm 20 ppm 200 series regulators PurityPlus Purified 2.6 PurityPlus Atomic Absorption 2.
Pure Gases TM Air A colorless, odorless, nonflammable gas. Shipping Information: Technical Information: DOT/TC Proper Name: Air, Compressed Chemical Symbol: Hazard Class: 2.2 Molecular Weight: 28.96 Specific Volume 13.3 ft /lb (0.83 m /kg) 3 I.D. Number: UN 1002 3 CAS Registry Number: 132259-10-0 Grade Purity Labels: Nonflammable Gas Impurity Maximum Equipment Recommended Total Hydrocarbons Moisture Oxygen Carbon Dioxide Carbon Monoxide 0.1 ppm 3 ppm 19.5% to 23.
Pure Gases TM Ammonia A colorless, pungent, toxic gas. Shipping Information: Technical Information: DOT/TC Proper Name: Ammonia, Anhydrous Chemical Symbol: NH3 Hazard Class: 2.3 Molecular Weight: 17.03 Specific Volume 22.6 ft /lb (1.41 m /kg) 3 I.D. Number: UN 1005 3 CAS Registry Number: 7664-41-7 Grade Labels: Poison Gas, Corrosive Purity Impurity Maximum Equipment Recommended 99.995 Oil Water < 0.
Pure Gases TM Argon A chemically inert, colorless, odorless, nontoxic gas. Shipping Information: Technical Information: DOT/TC Proper Name: Argon, Compressed Chemical Symbol: Ar Hazard Class: 2.2 Molecular Weight: 39.948 Specific Volume 9.7 ft /lb I.D. Number: UN 1006 3 CAS Registry Number: 7440-37-1 Grade Labels: Nonflammable Gas Purity Impurity Maximum Equipment Recommended 99.9999% Oxygen Moisture Nitrogen Total Hydrocarbons CO/CO2 0.15 ppm 0.15 ppm 0.40 ppm 0.10 ppm 0.
Pure Gases TM Carbon Dioxide A colorless, odorless, nonflammable slightly acidic gas. Shipping Information: Technical Information: DOT/TC Proper Name: Carbon Dioxide Chemical Symbol: CO2 Hazard Class: 2.2 Molecular Weight: 44.04 Specific Volume 8.76 ft /lb (0.55 m /kg) 3 I.D. Number: UN 1013 3 CAS Registry Number: 124-38-9 Grade Labels: Nonflammable Gas Purity Impurity Maximum Equipment Recommended 99.
Pure Gases TM Carbon Monoxide A colorless, odorless, toxic, flammable gas. Shipping Information: Technical Information: DOT/TC Proper Name: Carbon Monoxide Chemical Symbol: CO Hazard Class: 2.3 Molecular Weight: 28.01 Specific Volume 13.8 ft /lb (0.86 m /kg) 3 I.D. Number: UN 1016 3 CAS Registry Number: 630-08-0 Grade Labels: Poison Gas, Flammable Gas Purity Impurity Maximum Equipment Recommended 99.
Pure Gases TM Carbonyl Sulfide A colorless with an unpleasant smell. Technical Information: Shipping Information: Chemical Symbol: COS DOT/TC Proper Name: Carbonyl Sulfide Molecular Weight: 60.7 Hazard Class: 2.3 Specific Volume 2.1 I.D. Number: UN 2204 CAS Registry Number: 463-58-1 Grade Purity Labels: Flammable Gas Impurity Maximum Equipment Recommended Oxygen Nitrogen Water Carbon Dioxide Hydrogen Sulfide < 0.01% < 0.03% < 0.01% < 0.03% < 0.
Pure Gases TM A greenish-yellow, toxic, corrosive gas with an extremely disagreeable odor. Shipping Information: Technical Information: DOT/TC Proper Name: Chlorine Chemical Symbol: Cl2 Hazard Class: 2.3 Molecular Weight: 70.91 Specific Volume 5.4 ft /lb (0.33 m /kg) 3 I.D. Number: UN 1017 3 CAS Registry Number: 7782-50-5 Grade Chlorine Purity Labels: Poison Gas, Corrosive Impurity Maximum Equipment Recommended 99.9% Chlorine > 99.
Pure Gases TM Deuterium A colorless, odorless, flammable, stable isotope of hydrogen. Shipping Information: Technical Information: DOT/TC Proper Name: Deuterium Chemical Symbol: D2 Hazard Class: 2.1 Molecular Weight: 4.03 Specific Volume 95.9 ft /lb (5.95 m /kg) 3 I.D. Number: UN 1957 3 CAS Registry Number: 7782-39-0 Grade Labels: Flammable Gas Purity Impurity Maximum Equipment Recommended 99.
Pure Gases TM A brownish, toxic, corrosive, liquefied gas. Dinitrogen Tetroxide Shipping Information: Technical Information: DOT/TC Proper Name: Nitrogen Dioxide, Liquefied Chemical Symbol: NO2 Hazard Class: 2.3 Molecular Weight: 46.01 Specific Volume 4.7 ft /lb (0.29 m /kg) 3 I.D. Number: UN 1067 3 CAS Registry Number: 10102-44-0 Grade PurityPlus 2.5 (liquid phase) (Nitrogen Dioxide) Labels: Poison Gas, Oxidizer, Corrosive Purity Impurity Maximum Equipment Recommended 99.
Pure Gases TM Ethane A colorless, odorless, flammable gas. Shipping Information: Technical Information: Chemical Symbol: C2H6 DOT/TC Proper Name: Ethane, Compressed Hazard Class: 2.1 Molecular Weight: 30.07 Specific Volume 12.80 ft /lb (0.79 m /kg) 3 I.D. Number: UN 1035 3 CAS Registry Number: 74-84-0 Grade Labels: Flammable Gas Purity Impurity Maximum Equipment Recommended 99% Ethane > 99.0% 200 series regulators PurityPlus 2.0 PurityPlus 4.0 99.
Pure Gases TM Ethylene A colorless, flammable gas with a sweet odor. Shipping Information: Technical Information: Chemical Symbol: C2H4 DOT/TC Proper Name: Ethylene, Compressed Hazard Class: 2.1 Molecular Weight: 28.05 Specific Volume 13.70 ft /lb (0.86 m /kg) 3 I.D. Number: UN 1962 3 CAS Registry Number: 74-85-1 Grade Labels: Flammable Gas Purity Impurity Maximum Equipment Recommended 99.99% Ethane Total Impurities < 100 ppm < 100 ppm 300 series brass regulators 99.
Pure Gases TM Helium A colorless, odorless, tasteless, inert gas. Shipping Information: Technical Information: DOT/TC Proper Name: Helium, Compressed Chemical Symbol: He Hazard Class: 2.2 Molecular Weight: 4.003 Specific Volume 96.7 ft /lb (6.0 m /kg) 3 I.D. Number: UN 1046 3 CAS Registry Number: 7440-59-7 Grade Labels: Nonflammable Gas Purity Impurity Maximum Equipment Recommended 99.
Pure Gases TM Hexafluoropropylene A colorless, odorless, nonflammable gas. Shipping Information: Technical Information: Chemical Symbol: C3F6 DOT/TC Proper Name: Hexafluoropropylene, Compressed Hazard Class: 2.2 Molecular Weight: 150.03 Specific Volume 2.58 ft /lb (0.161 m /kg) 3 I.D. Number: UN 1858 3 CAS Registry Number: 116-15-4 Grade Labels: Nonflammable Gas Purity Impurity Maximum Equipment Recommended 99.9% Saturated Hydrocarbons Unsaturated Hydrocarbons Oxygen Acidity < 0.
Pure Gases TM Hydrogen A colorless, odorless, flammable gas. Shipping Information: Technical Information: DOT/TC Proper Name: Hydrogen, Compressed Chemical Symbol: H2 Hazard Class: 2.1 Molecular Weight: 2.02 Specific Volume 192 ft /lb (11.9 m /kg) 3 I.D. Number: UN 1049 3 CAS Registry Number: 1333-74-0 Grade Labels: Flammable Gas Purity Impurity Maximum Equipment Recommended 99.999% Moisture Oxygen Nitrogen Total Hydrocarbons 3 ppm 1 ppm 5 ppm 1 ppm 300 series brass regulators 99.
Pure Gases TM Hydrogen Chloride A colorless, corrosive, irritating, toxic gas. Shipping Information: Technical Information: DOT/TC Proper Name: Hydrogen Chloride, Anhydrous Chemical Symbol: HCl Hazard Class: 2.3 Molecular Weight: 36.46 Specific Volume 10.6 ft /lb (0.68 m /kg) 3 I.D. Number: UN 1050 3 CAS Registry Number: 7647-01-0 Grade Labels: Poison Gas, Corrosive Purity Impurity PurityPlus 5.0 (liquid phase) Maximum Equipment Recommended 99.
Pure Gases TM Hydrogen Sulfide A colorless, flammable, toxic gas with the odor of rotten eggs. Shipping Information: Technical Information: Chemical Symbol: H2S DOT/TC Proper Name: Hydrogen Sulfide, Liquefied Molecular Weight: 34.08 Hazard Class: 2.3 Specific Volume 11.2 ft /lb (0.69 m /kg) 3 I.D. Number: UN 1053 3 CAS Registry Number: 7783-06-4 Grade Labels: Poison Gas, Flammable Gas Purity Impurity Maximum Equipment Recommended 99.5% Hydrogen Sulfide > 99.
Pure Gases TM Isobutane A colorless, flammable gas. Shipping Information: Technical Information: Chemical Symbol: C4H10 DOT/TC Proper Name: Isobutane Hazard Class: 2.1 Molecular Weight: 58.12 Specific Volume 6.5 ft /lb (0.40 m /kg) 3 I.D. Number: UN 1969 3 CAS Registry Number: 75-28-5 Grade Labels: Flammable Gas Purity Impurity Maximum Equipment Recommended PurityPlus 2.5 (liquid phase) 99.5% Isobutane > 99.5% 200 series regulators PurityPlus 2.
Pure Gases TM Krypton A colorless, odorless, nonflammable, inert, rare gas. Shipping Information: Technical Information: DOT/TC Proper Name: Krypton, Compressed Chemical Symbol: Kr Hazard Class: 2.2 Molecular Weight: 83.80 Specific Volume 4.6 ft /lb (0.29 m /kg) 3 I.D. Number: UN 1056 3 CAS Registry Number: 7439-90-9 Grade Labels: Nonflammable Gas Purity Impurity Maximum Equipment Recommended 99.999% Nitrogen Oxygen Hydrogen CO/CO2 Tetrafluoromethane Total Hydrocarbons Water Xenon 99.
Pure Gases TM Methane A colorless, odorless, tasteless, flammable gas. Shipping Information: Technical Information: DOT/TC Proper Name: Methane, Compressed Chemical Symbol: CH4 Hazard Class: 2.1 Molecular Weight: 16.04 Specific Volume 23.7 ft /lb (1.47 m /kg) 3 I.D. Number: UN 1971 3 CAS Registry Number: 74-82-8 Grade Labels: Flammable Gas Purity Impurity Maximum Equipment Recommended 99.999% Methane > 99.999% 300 series brass regulators 99.99% Methane > 99.
Pure Gases TM Neon A colorless, odorless, nonflammable, inert gas. Shipping Information: Technical Information: DOT/TC Proper Name: Neon, Compressed Chemical Symbol: Ne Hazard Class: 2.2 Molecular Weight: 20.18 Specific Volume 19.2 ft /lb (1.19 m /kg) 3 I.D. Number: UN 1065 3 CAS Registry Number: 7440-01-9 Grade Labels: Nonflammable Gas Purity Impurity Maximum Equipment Recommended 99.999% Helium Nitrogen Oxygen Water Hydrogen Total Hydrocarbons 799.
Pure Gases TM A colorless, nonflammable, toxic, oxidizing gas with an irritating odor. Shipping Information: Technical Information: DOT/TC Proper Name: Nitric Oxide Chemical Symbol: NO Hazard Class: 2.3 Molecular Weight: 30.01 Specific Volume 12.9 ft /lb (0.80 m /kg) 3 I.D. Number: UN 1660 3 CAS Registry Number: 10102-43-9 Grade Nitric Oxide Labels: Poison Gas, Oxidizer, Corrosive Purity Impurity Maximum Equipment Recommended 99.9% Nitric Oxide > 99.
Pure Gases TM Nitrogen A colorless, odorless, chemically inert gas. Shipping Information: Technical Information: DOT/TC Proper Name: Nitrogen, Compressed Chemical Symbol: N2 Hazard Class: 2.2 Molecular Weight: 28.01 Specific Volume 13.8 ft /lb (0.86 m /kg) 3 I.D. Number: UN 1066 3 CAS Registry Number: 7727-37-9 Grade Labels: Nonflammable Gas Purity Impurity Maximum Equipment Recommended 99.9999% Oxygen Moisture Total Hydrocarbons CO/CO2 0.15 ppm 0.15 ppm 0.10 ppm 0.
Pure Gases TM Nitrogen Trifluoride A toxic, colorless, odorless, nonflammable gas. Shipping Information: Technical Information: DOT/TC Proper Name: Nitrogen Trifluoride, Compressed Chemical Symbol: NF3 Hazard Class: 2.2 Molecular Weight: 71.00 Specific Volume 5.043 ft /lb (0.337 m /kg) 3 I.D. Number: UN 2451 3 CAS Registry Number: 7783-54-2 Grade Labels: Nonflammable Gas, Oxidizer Purity Impurity Maximum Equipment Recommended 99.
Pure Gases TM Nitrous Oxide A colorless, sweet-tasting, oxidizing gas. Technical Information: Shipping Information: Chemical Symbol: N2O DOT/TC Proper Name: Nitrous Oxide, Compressed Molecular Weight: 44.01 Hazard Class: 2.2 Specific Volume 8.7 ft /lb (0.54 m /kg) 3 I.D.
Pure Gases TM Octafluoropropane A colorless, relatively non-reactive gas. Shipping Information: Technical Information: Chemical Symbol: C3F8 DOT/TC Proper Name: Octafluoropropane Hazard Class: 2.2 Molecular Weight: 188.0 Specific Volume 2.02 ft /lb (0.126 m /kg) 3 I.D. Number: UN 2424 3 CAS Registry Number: 76-19-7 Grade (HC-218) Labels: Nonflammable Gas Purity Impurity Maximum Equipment Recommended 99.
Pure Gases TM Oxygen A colorless, odorless, tasteless, highly oxidizing gas. Shipping Information: Technical Information: DOT/TC Proper Name: Oxygen, Compressed Chemical Symbol: O2 Hazard Class: 2.2 Molecular Weight: 32 Specific Volume 12.1 ft /lb (0.76 m /kg) 3 I.D. Number: UN 1072 3 CAS Registry Number: 7782-44-7 Grade Labels: Nonflammable Gas, Oxidizer Purity Impurity Maximum Equipment Recommended 99.
Pure Gases TM Sulfur Hexafluoride A colorless, odorless, liquefied gas. Shipping Information: Technical Information: DOT/TC Proper Name: Sulfur Hexafluoride Chemical Symbol: SF6 Hazard Class: 2.2 Molecular Weight: 146.05 Specific Volume 2.50 ft /lb (0.16 m /kg) 3 I.D. Number: UN 1080 3 CAS Registry Number: 2551-62-4 Grade Labels: Nonflammable Gas Purity Impurity Maximum Equipment Recommended 99.999% Air Tetrafluoromethane Water < 6 ppm < 2 ppm < 2 ppm 300 series brass regulators 99.
Pure Gases TM Tetrafluoromethane (HC-14) A colorless, odorless, nonflammable gas. Shipping Information: Technical Information: DOT/TC Proper Name: Compressed Gas NOS Tetrafluoromethane Chemical Symbol: CF4 Hazard Class: 2.2 Molecular Weight: 88.005 Specific Volume 4.40 ft /lb (0.027 m /kg) 3 I.D. Number: UN 1982 3 CAS Registry Number: 75-73-0 Grade Labels: Nonflammable Gas Purity Impurity Maximum Equipment Recommended 99.
Pure Gases TM Xenon A colorless, odorless, nontoxic, inert gas. Technical Information: Shipping Information: Chemical Symbol: Xe DOT/TC Proper Name: Xenon Molecular Weight: 131.3 Hazard Class: 2.2 Specific Volume 2.90 ft /lb (0.18 m /kg) 3 I.D. Number: UN 2036 3 CAS Registry Number: 7440-63-3 Grade Labels: Nonflammable Gas Purity Impurity 99.
Mixtures TM Laser Mixtures. Source Material Purities:: Shipping Information: Carbon Dioxide: 99.99% DOT/TC Proper Name: Compressed Gas NOS (Nitrogen, Helium) Nitrogen 99.999% Hazard Class: 2.2 Helium 99.999% I.D. Number: UN 1956 Carbon Monoxide: 99.5% Labels: Nonflammable Gas Hydrogen 99.99% Carbon Dioxide Laser Mixtures (three, four, and five gases) Mixture * CGA Size * Pressure Equipment Recommended 3.4% CO2 / 15.6% N2 / He 4.5% CO2 / 13.5% N2 / He 6% CO2 / 18% N2 / He 4.5% CO2 / 13.
Equipment TM How to Choose a Regulator While all regulators can reduce pressure in a gas system, PurityPlus high purity regulators conform to very exacting standards of pressure control. Below, we discuss some bases of comparison that can help you navigate this catalog and choose a regulator that best suits your needs. Of course, your local IWDC distributor would be happy to answer any further questions you may have about regulator design and operation. Single Stage vs.
Equipment TM Ordering PurityPlus Regulators In accordance with our philosophy of flexible design, PurityPlus has developed a versatile modular manufacturing system to accommodate any individual requirement. With all the options PurityPlus offers, listing discrete part numbers for each regulator series would be impossible. Therefore, we have created a part number matrix which allows you to design a regulator to meet the needs of any application.
Equipment TM Materials Compatibility Pure Gases Formula Acetylene Purified, 99.6% Regulators 100 Series 200 Series 300 Series 400 Series Plated Plated Stainless Stainless Brass Brass Brass Steel Aluminum Brass Steel C2H2 Other 500 Series Stainless Steel Brass • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Air Ultra Zero Zero Synthetic Compressed Dry Ammonia Electronic, 99.
Equipment TM Regulators Pure Gases Other 100 Series 200 Series 300 Series 400 Series Plated Plated Stainless Stainless Formula Brass Brass Brass Steel Aluminum Brass Steel Hydrogen Chloride HCl Electronic, 99.99% Technical, 99% Hydrogen Sulfide H2S CP, 99.5% Isobutane Research, 99.96% CP, 99% • C4H10 Krypton • • CH4 Research, 99.99% Ultra High Purity, 99.97% CP, 99% Technical, 98% Commercial, 93% Methyl Chloride CP, 99.5% Neon • • • • • CP, 99% Nitrogen Electronic, 99.
Equipment TM Mixed Gases Regulators Other 100 Series 200 Series 300 Series 400 Series Plated Plated Stainless Stainless Brass Brass Brass Steel Aluminum Brass Steel 500 Series Stainless Steel Brass Ammonia in Argon in Helium in Hydrogen in Nitrogen • • • • • • • • • • • • Argon in Helium in Hydrogen in Nitrogen in Oxygen • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Carbon Dioxide in Air i
Equipment TM 202 Series Description The 202 Series regulators are intended for primary pressure control of non-corrosive, high purity or liquefied gases (up to grade 4.5) in applications where minor fluctuations in outlet pressure due to diminishing inlet supply pressure can be tolerated.
Equipment TM Flow Performance 50 (3.4) 220 (15.2) 200 Series Single Stage Regulator 200 Series Single Stage Regulator 40 (2.8) OUTLET PRESSURE - PSIG (BAR) OUTLET PRESSURE - PSIG (BAR) 200 (14) 2000 PSIG (INLET PRESSURE) 30 (2.1) 200 PSIG (INLET PRESSURE) 500 PSIG (INLET PRESSURE) 20 (1.4) 10 (0.7) 200 PSIG (INLET PRESSURE) 500 PSIG (INLET PRESSURE) 180 (12.4) 160 (11) 2000 PSIG (INLET PRESSURE) 1000 PSIG (INLET PRESSURE) 140 (9.7) 500 PSIG (INLET PRESSURE) 120 (8.
Equipment TM 302 Series Description The 302 Series regulators are intended for primary pressure control of noncorrosive, high purity or liquefied gases or for applications where minor fluctuations in outlet pressure due to diminishing inlet supply can be tolerated.
Equipment TM Flow Performance 100 (6.9) 300 Series Single Stage Regulator 90 (6.2) 450 (31) 2000 PSIG (138 BAR) INLET PRESSURE 80 (5.5) 2000 PSIG (138 BAR) INLET PRESSURE 1000 PSIG (138 BAR) INLET PRESSURE 400 (27.6) 500 PSIG (35 BAR) INLET PRESSURE 70 (4.8) 350 (24.1) 200 PSIG (13.8 BAR) INLET PRESSURE 60 (4.1) 300 (20.7) OUTLET PRESSURE - PSIG (BAR OUTLET PRESSURE - PSIG (BAR 300 Series Single Stage Regulator 500 (34.5) 50 (3.4) 40 (2.8) 30 (2.
Equipment TM 408 Series Description The 408 Series regulators are intended for primary pressure control of mildly corrosive high purity gases such as ammonia, hydrogen sulfide and sulfur dioxide or for applications requiring the light weight of an aluminum body regulator.
Equipment TM Flow Performance 100 (6.9) 500 (34.5) 90 (6.2) 450 (31) 2000 PSIG (138 BAR) INLET PRESSURE 70 (4.8) 500 PSIG (35 BAR) INLET PRESSURE 200 PSIG (13.8 BAR) INLET PRESSURE 60 (4.1) 50 (3.4) 40 (2.8) 30 (2.0) 200 PSIG (13.8 BAR) INLET PRESSURE 20 (1.4) 10 (0.7) 200 PSIG (13.8 BAR) INLET PRESSURE 2000 PSIG (138 BAR) INLET PRESSURE 1000 PSIG (138 BAR) INLET PRESSURE 350 (24.1) 300 (20.7) 250 (17.2) 200 (13.8) 2000 PSIG (138 BAR) INLET PRESSURE 150 (10.
Equipment TM 422 Series Description The 422 Series regulators are intended for primary pressure control of ultrahigh purity and corrosive gases in applications where minor fluctuations in outlet pressure due to diminishing inlet supply can be tolerated.
Equipment TM Flow Performance 100 (6.9) 500 (34.5) 90 (6.2) 450 (31) 2000 PSIG (138 BAR) INLET PRESSURE 70 (4.8) 400 (27.6) 500 PSIG (35 BAR) INLET PRESSURE OUTLET PRESSURE - PSIG (BAR) OUTLET PRESSURE - PSIG (BAR) 80 (5.5) 200 PSIG (13.8 BAR) INLET PRESSURE 60 (4.1) 50 (3.4) 40 (2.8) 30 (2.0) 200 PSIG (13.8 BAR) INLET PRESSURE 20 (1.4) 10 (0.7) 200 PSIG (13.
Equipment TM 212 Series Description The 212 Series regulators are intended for primary pressure control of non-corrosive, high purity or liquefied gases (up to grade 4.5) for applications requiring constant pressure control and delivery regardless of supply pressure variations.
Equipment TM Flow Performance 50 (3.4) 220 (15.2) 200 Series Dual Stage Regulator 200 Series Dual Stage Regulator 40 (2.8) OUTLET PRESSURE - PSIG (BAR) OUTLET PRESSURE - PSIG (BAR) 200 (14) 200 PSIG - 2000 PSIG (INLET PRESSURE) 30 (2.1) 20 (1.4) 2000 PSIG (INLET PRESSURE) 1000 PSIG (INLET PRESSURE) 160 (11) 140 (9.7) 500 PSIG (INLET PRESSURE) 120 (8.3) 100 (7) 2000 PSIG 500 PSIG (INLET PRESSURE) (INLET PRESSURE) 200 PSIG (INLET PRESSURE) 80 (5.5) 60 (4.
Equipment TM 312 Series Description The 312 Series regulators are intended for primary pressure control of noncorrosive, high purity or liquefied gases for applications requiring constant pressure control and delivery regardless of supply pressure variations.
Equipment TM Flow Performance 300 Series Dual Stage Regulator 20 (1.38) 2000 PSIG INLET PRESSURE 18 (1.24) 225 (15.5) 500 PSIG INLET PRESSURE 16 (1.1) 200 (13.8) OUTLET PRESSURE - PSIG (BAR) OUTLET PRESSURE - PSIG (BAR) 300 Series Dual Stage Regulator 250 (17.2) 14 (.97) 12 (.83) 2000 PSIG INLET PRESSURE 10 (.69) 500 PSIG INLET PRESSURE 200 PSIG INLET PRESSURE 8 (.55) 6 (.41) 175 (12.0) 150 (10.3) 2000 PSIG INLET PRESSURE 125 (8.6) 500 PSIG INLET PRESSURE 100 (6.
Equipment TM 432 Series Description The 432 Series regulators are intended for primary pressure control of ultra high purity or corrosive gases for applications requiring constant pressure control and delivery regardless of supply pressure variations.
Equipment TM Flow Performance 20 (1.38) 250 (17.2) 400 Series Dual Stage Regulator 225 (15.5) 500 PSIG INLET PRESSURE 16 (1.1) 200 (13.8) OUTLET PRESSURE - PSIG (BAR) OUTLET PRESSURE - PSIG (BAR) 400 Series Dual Stage Regulator 2000 PSIG INLET PRESSURE 18 (1.24) 14 (0.97) 12 (0.83) 2000 PSIG INLET PRESSURE 10 (0.69) 500 PSIG INLET PRESSURE 200 PSIG INLET PRESSURE 8 (0.55) 6 (0.41) 175 (12.0) 150 (10.3) 2000 PSIG INLET PRESSURE 125 (8.6) 500 PSIG INLET PRESSURE 100 (6.
Equipment TM 304 Series Description The 304 Series regulators are intended for secondary pressure control of noncorrosive, high purity or liquefied gases or as point of use pressure control in high purity gas distribution systems.
Equipment TM Flow Performance 100 (6.9) 300 Series Single Stage Regulator 90 (6.2) 450 (31) 2000 PSIG (138 BAR) INLET PRESSURE 80 (5.5) 2000 PSIG (138 BAR) INLET PRESSURE 1000 PSIG (138 BAR) INLET PRESSURE 400 (27.6) 500 PSIG (35 BAR) INLET PRESSURE 70 (4.8) 350 (24.1) 200 PSIG (13.8 BAR) INLET PRESSURE 60 (4.1) 300 (20.7) OUTLET PRESSURE - PSIG (BAR OUTLET PRESSURE - PSIG (BAR 300 Series Single Stage Regulator 500 (34.5) 50 (3.4) 40 (2.8) 30 (2.
Equipment TM 445 Series Description The 445 Series regulators are intended for secondary pressure control of ultra high purity and corrosive gases or as pointof- use pressure control in high purity gas distribution systems.
Equipment TM Flow Performance 100 (6.9) 500 (34.5) 90 (6.2) 450 (31) 2000 PSIG (138 BAR) INLET PRESSURE 70 (4.8) 400 (27.6) 500 PSIG (35 BAR) INLET PRESSURE OUTLET PRESSURE - PSIG (BAR) OUTLET PRESSURE - PSIG (BAR) 80 (5.5) 200 PSIG (13.8 BAR) INLET PRESSURE 60 (4.1) 50 (3.4) 40 (2.8) 30 (2.0) 200 PSIG (13.8 BAR) INLET PRESSURE 20 (1.4) 10 (0.7) 200 PSIG (13.
Equipment TM 483 Series Description The 483 Series regulator applications are wide and varied including high flow purging, semiconductor manufacturing, manifold and line regulation.
Equipment TM Flow Performance 250 (17.2) 483 Series High Flow Regulator 2000 PSIG (INLET PRESSURE) 500 PSIG (INLET PRESSURE) 225 (15.5) 200 PSIG (INLET PRESSURE) OUTLET PRESSURE PSIG (BAR) 200 (13.8) 2000 PSIG (INLET PRESSURE) 500 PSIG (INLET PRESSURE) 175 (12.1) 200 PSIG (INLET PRESSURE) 150 (11.7) 2000 PSIG (INLET PRESSURE) 125 (8.6) 500 PSIG (INLET PRESSURE) 100 (6.9) 200 PSIG (INLET PRESSURE) 75 (5.2) 50 (3.4) 2000 PSIG (INLET PRESSURE) 25 (1.
Equipment TM 484 Series Description The 484 Series regulator applications are wide and varied including high flow purging, semiconductor manufacturing, manifold and line regulation.
Equipment TM Flow Performance 250 (17.2) 484 Series High Flow Regulator 2000 PSIG (INLET PRESSURE) 500 PSIG (INLET PRESSURE) 225 (15.5) 200 PSIG (INLET PRESSURE) OUTLET PRESSURE PSIG (BAR) 200 (13.8) 2000 PSIG (INLET PRESSURE) 500 PSIG (INLET PRESSURE) 175 (12.1) 200 PSIG (INLET PRESSURE) 150 (11.7) 2000 PSIG (INLET PRESSURE) 125 (8.6) 500 PSIG (INLET PRESSURE) 100 (6.9) 200 PSIG (INLET PRESSURE) 75 (5.2) 50 (3.4) 2000 PSIG (INLET PRESSURE) 25 (1.
Equipment TM 308 Series Description The 308 Series regulators are specifically designed to prevent freeze-up problems associated with high flows of carbon dioxide and nitrous oxide. As CO2 or N2O passes through a regulator seat, dry ice can form if the flow is too high, causing the regulator to freeze up.
Equipment TM Flow Performance 125 (8.6) 308 Series Single Stage Regulator 40 (2.8) 100 (6.9) OUTLET PRESSURE - PSIG (BAR) 30 (2) OUTLET PRESSURE - PSIG (BAR) 308 Series Single Stage Regulator 2000 PSIG (138 BAR) INLET PRESSURE 20 (1.4) 200 PSIG (13.8 BAR) INLET PRESSURE 10 (0.7) 500 PSIG (34.5 BAR) INLET PRESSURE 2000 PSIG (138 BAR) INLET PRESSURE 2000 PSIG (138 BAR) INLET PRESSURE 75 (5.2) 200 PSIG (13.8 BAR) INLET PRESSURE 50 (3.4 2000 PSIG (138 BAR) INLET PRESSURE 25 (1.
Equipment TM 325 Series Description The 325 Series regulators are specifically designed for use with noncorrosive gases in lecture bottles. The incorporation of our smallest Capsule® allows excellent pressure regulation over the useful pressure range of a lecture bottle.
Equipment TM Flow Performance 20 (1.3) 50 (3.4) 45 (3.1) 16 (1.1) OUTLET PRESSURE - PSIG (BAR) OUTLET PRESSURE - PSIG (BAR) 18 (1.2) 14 (0.96) 2000 PSIG (INLET PRESSURE) 12 (0.82) 500 PSIG (INLET PRESSURE) 10 (0.69) 8 (0.55) 200 PSIG (INLET PRESSURE) 6 (0.41) 2000 PSIG (INLET PRESSURE) 500 PSIG (INLET PRESSURE) 40 (2.8) 35 (2.4) 200 PSIG (INLET PRESSURE) 30 (2.1) 25 (1.7) 20 (1.4) 15 (1.03) 4 (0.28) 10 (0.69) 2 (0.14) 5 (0.34) 25 (11.8) 50 (23.6) 75 (35.4) 100 (47.
Equipment TM Lecture Bottle Equipment Series 3910 single stage brass lecture bottle regulator Series 3920 Description single stage stainless steel lecture bottle regulator Advanced Features The Series 3910 regulator is designed for • Small compact design. use with non-corrosive, non-toxic gases in lecture bottles. The Series 3920 lecture bottle regulator is designed for use with corrosive, and/or toxic lecture bottle gases. These light weight, compact single stage Max.
Equipment TM Lecture Bottle Equipment Description Lecture bottles have rounded ends and require some means of support when in use. We provide two types of holders here that meet most requirements. Non-Tip Stand - Model 475 This stand offers a convenient method of securing a lecture bottle on a table or lab bench. The stand is made of light weight brushed aluminum and, yet the large diameter bas provides stability even when a regulator is installed on the bottle.
Equipment TM 428 Series Description The 428 Series regulators are intended for secondary pressure control of the highest purity gases or as point of use pressure control in high purity gas distribution systems.
Equipment TM Flow Performance 100 (6.9) 500 (34.5) 90 (6.2) 450 (31) 2000 PSIG (138 BAR) INLET PRESSURE 70 (4.8) 500 PSIG (35 BAR) INLET PRESSURE 200 PSIG (13.8 BAR) INLET PRESSURE 60 (4.1) 50 (3.4) 40 (2.8) 30 (2.0) 200 PSIG (13.8 BAR) INLET PRESSURE 20 (1.4) 10 (0.7) 200 PSIG (13.8 BAR) INLET PRESSURE 500 PSIG (35 BAR) INLET PRESSURE 5 (142) 500 PSIG (35 BAR) INLET PRESSURE 2000 PSIG (138 BAR) INLET PRESSURE 400 (27.6) OUTLET PRESSURE - PSIG (BAR) OUTLET PRESSURE - PSIG (BAR) 80 (5.
Equipment TM 429 Series Description The 429 Series regulators are intended for primary pressure control of the highest purity gases or for applications where minor fluctuations in outlet pressure due to diminishing inlet supply pressure can be tolerated.
Equipment TM Flow Performance 100 (6.9) 500 (34.5) 90 (6.2) 450 (31) 2000 PSIG (138 BAR) INLET PRESSURE 70 (4.8) 500 PSIG (35 BAR) INLET PRESSURE 200 PSIG (13.8 BAR) INLET PRESSURE 60 (4.1) 50 (3.4) 40 (2.8) 30 (2.0) 200 PSIG (13.8 BAR) INLET PRESSURE 20 (1.4) 10 (0.7) 200 PSIG (13.8 BAR) INLET PRESSURE 500 PSIG (35 BAR) INLET PRESSURE 5 (142) 500 PSIG (35 BAR) INLET PRESSURE 2000 PSIG (138 BAR) INLET PRESSURE 400 (27.6) OUTLET PRESSURE - PSIG (BAR) OUTLET PRESSURE - PSIG (BAR) 80 (5.
Equipment 452 Series Description The 452 Series electrically-heated vaporizing regulator is designed to heat and vaporize an inlet gas stream containing heavy hydrocarbons so that they will remain in the vapor state for chromatographic analysis. The entire system is explosion proof for safety. Included are three temperature ranges, three heater wattages, and seven outlet pressure ranges.
Equipment TM Flow Performance 100 (6.9) 500 (34.5) 90 (6.2) 450 (31) 2000 PSIG (138 BAR) INLET PRESSURE 70 (4.8) 400 (27.6) 500 PSIG (35 BAR) INLET PRESSURE OUTLET PRESSURE - PSIG (BAR) OUTLET PRESSURE - PSIG (BAR) 80 (5.5) 200 PSIG (13.8 BAR) INLET PRESSURE 60 (4.1) 50 (3.4) 40 (2.8) 30 (2.0) 200 PSIG (13.8 BAR) INLET PRESSURE 20 (1.4) 10 (0.7) 200 PSIG (13.
Equipment TM 492 Series Description The 492 Series regulators are intended for primary pressure control of non-corrosive gases at a maximum inlet pressure of 6000 PSIG.
Equipment TM Flow Performance 492 Series Regulator 492 Series Regulator Ordering Information and Configuration Options A 492 Series Outlet 492 Pressure 1: 0-750 2: 0-1500 3: 0-2500 4: 0-4500* 5: 0-6000† 6: 0-3500* Outlet Gauge 0-1000 PSIG 0-4000 PSIG 0-4000 PSIG 0-6000 PSIG 0-10,000 PSIG 0-6000 PSIG B Inlet Maximum 0: 6000 PSIG 3: 3000 PSIG 8: 5500 PSIG 9: 6000 PSIG C Inlet Gauge Outlet Assemblies None 0: ¼” FPT 0-4000 PSIG 1: ¼” MPT 0-6000 PSIG 2: ¼” Tube 0-10,000 PSIG 5: Needle Valve ¼” MPT 6:
Equipment TM 3550 Series two stage, stainless steel regulator Description Advanced Features Typical Applications The series 3550 two stage regulators are designed and constructed for use with reactive and corrosive gases and gas mixtures. Compact in design, these regulators provide outstanding performance, comparable to most larger diaphragm competitive models.
Equipment TM 3460 Series single stage, monel® regulator Description Advanced Features Typical Applications The series 3460 single stage regulators are specifically designed and constructed for use with difficult to handle gases, like chlorine and hydrogen chloride. The monel® diaphragm, inlet filter, poppet and nozzle assembly installed in a monel® body with a 316 stainless steel bonnet create a high purity corrosive gas regulator for most difficult environments.
Equipment TM 3470 Series single stage, nickel plated brass regulator Description Advanced Features Typical Applications The series 3470 single stage regulators are specifically designed and constructed for use with difficult to handle gases, such as chlorine and hydrogen chloride. The large monel nozzle and Kel-F seat combined with the tied diaphragm assembly greatly reduces the possibility of failure due to creep so common in other corrosive gas regulators.
Equipment TM Series 3700HP single stage, low delivery pressure regulator Description Advanced Features These regulators were designed to meet the needs of applications requiring reliable low-pressure control while maintaining gas purity. They are available in single and two stage versions to meet most non-corrosive gas applications. The low pressure stage has a large sensitive aluminum-faced neoprene diaphragm to provide delivery pressures as low as 2” of water. • Extremely low delivery pressures.
Equipment TM Protocol Station Description The 529 Series Protocol Station is a regulator option designed for the convenient wall mounting of any CONCOA high purity regulator. Wall mounting of a regulator provides ease of use, prevents regulator damage and improves safety. The 529 Series Protocol Station is available in chrome-plated brass or 316 stainless steel construction as specified by the regulator series.
Equipment TM Protocol Switchover Station Description The 529 Series Protocol Switchover Station combines all of the safety and convenience features of a standard Protocol Station with the added efficiency of having a reserve cylinder connected to the system. The Protocol Switchover Station valving allows manual switching and isolation of the depleted cylinder for safe change-out.
Equipment TM Protocol Switchover Alarm Description The 529 Series Protocol Switchover Alarm combines all of the features of the Protocol Switchover Station with the added security of a remote alarm system. The Protocol Switchover Alarm will provide an audio/visible warning when a cylinder is nearly depleted.
Equipment TM www.purityplusgas.
Equipment TM 522 Series Description Advanced Features The 522 Series AutoSwitch is a continuous gas delivery system for high purity gas service, typically in the laboratory or process plant, that automatically changes cylinder or bank priority from the primary source to a reserve supply without transmitting pressure fluctuations to the use line. Internal pressure switches, warning lights, and remote alarm indicate low bank pressure.
Equipment TM Flow Performance 400 (27.6) 522 Series AutoSwitch OUTLET PRESSURE - PSI (BAR) 350 (20.7) 300 (20.7) 250 (17.2) 200 (13.8) 150 (10.3) 100 (6.9) 50 (3.4) 100 (47.2) 200 (94.4) 300 (141.6) 400 (188.
Equipment TM 523 Series Description Advanced Features The 523 Series AutoSwitch is a continuous gas delivery system for ultra-high purity or corrosive gas service, typically in the laboratory or process plant, that automatically changes cylinder or bank priority from primary source to a reserve supply without transmitting pressure fluctuations to the use line. Internal pressure switches, warning lights, and remote alarm indicate low bank pressure and the need to change depleted cylinders.
Equipment TM Flow Performance 400 (27.6) 523 Series AutoSwitch OUTLET PRESSURE - PSI (BAR) 350 (20.7) 300 (20.7) 250 (17.2) 200 (13.8) 150 (10.3) 100 (6.9) 50 (3.4) 100 (47.2) 200 (94.4) 300 (141.6) 400 (188.
Equipment TM 536 Series Description Advanced Features The 536 Series AutoSwitch GL is a continuous gas delivery system for high purity gas service that automatically changes cylinder or bank priority from a cryogenic source to a reserve bank of high pressure cylinders without transmitting pressure fluctuations to the use line.
Equipment TM Flow Performance Ordering Information and Configuration Options 536 A B C Series Outlet Pressure Liquid Cylinders (Primary) 536 2: 0-50 PSIG 0: No Inlet Connection 3: 0-100 PSIG 1: One Cylinder* 2: Two Cylinders† 3: Three Cylinders† 4: Four Cylinders† * Includes 36” flexible pigtail and diaphragm valve † Related Options Each manifold header includes 36” flexible pigtail, manifold extensions and mounting hardware High Pressure (Reserve) 0: No Inlet Connection 1: One Cylinder* 2: Two Cy
Equipment TM 537 Series Description Advanced Features The 537 AutoSwitch GL is a continuous gas • 400 Series 316L Stainless Components Capsule® seat delivery system for high purity gas service that automatically changes cylinder or bank priority • Metal to metal seals No possibility of gas contamination from a cryogenic source to a reserve bank of high pressure cylinders without transmitting • Integral Line Regulator Stable line pressure during change over pressure fluctuations to the use line.
Equipment TM Flow Performance Ordering Information and Configuration Options 537 A Series Outlet 537 Pressure 2: 0-50 PSIG 3: 0-100 PSIG B C Liquid Cylinders (Primary) 0: No Inlet Connection 1: One Cylinder* 2: Two Cylinders† 3: Three Cylinders† 4: Four Cylinders† * Includes 36” flexible pigtail and diaphragm valve † Related Options Each manifold header includes 36” flexible pigtail, manifold extensions and mounting hardware High Pressure (Reserve) 0: No Inlet Connection 1: One Cylinder* 2: Two C
Equipment TM 539 Series Description The IntelliSwitch electronic switchover provides continuous gas supply from liquid cylinders, high pressure cylinders, or a combination of the two allowing the end-user to select the most economical mode of gas supply. Microprocessor control lowers yearly gas cost by eliminating liquid cylinder vent loss and excess residual return, making the IntelliSwitch the perfect choice for laboratory, pilot plant or process applications.
Equipment TM Installation Dimensions Approx. 2 43/64" (67.9mm) Max. 12 3/8" (314.3mm) 10" (254mm) 45/64" (17.8mm) DELIVERY LEFT BANK READY REPLACE RIGHT BANK READY IN USE 14 3/8" (365.1mm) CRYOGENIC BAR PWR CRYOGENIC GAS 350 PSI 500 PSI 16 BAR 24 BAR 34 BAR RESET REPLACE 3000 PSI MAX. IN USE REMOTE GAS 230 PSI 350 PSI 500 PSI 16 BAR 24 BAR 34 BAR 3000 PSI MAX. GAS SOURCE GAS SOURCE 3 1/8" (79.4mm) 15 1/2" (393.7mm) 14 3/4" (374.7mm) PSI 230 PSI 3 3/16" (80.
Equipment TM 526 Series Description The 526 Series Switchover is an automatic switchover system designed to supply a continuous supply of high purity, non-corrosive gas. The system comes with either flexible pigtails for use with two cylinders or manifold connectors for use with the Maniflex Modular Manifold System. Due to pressure differential considerations, an integral line regulator is available to maintain constant downstream pressure.
Equipment TM Flow Performance 526 Series Automatic Switchover OUTLET PRESSURE - PSI (BAR) 250 (17.2) 200 (13.8) 150 (10.3) 100 (6.9) 50 (3.4) 100 (47.2) 200 (94.4) 300 (141.6) 400 (188.
Equipment TM 527 Series Description The 527 Series Switchover is an automatic switchover system designed to supply a continuous supply of high purity, corrosive gas. The system comes with either flexible pigtails for use with two cylinders or manifold connectors for use with the Maniflex Modular Manifold System. Due to pressure differential considerations, an integral line regulator is available to maintain constant downstream pressure.
Equipment TM Flow Performance 527 Series Automatic Switchover OUTLET PRESSURE - PSI (BAR) 250 (17.2) 200 (13.8) 150 (10.3) 100 (6.9) 50 (3.4) 100 (47.2) 200 (94.4) 300 (141.6) 400 (188.
Equipment TM Advantium 8 Alarm Description Designed for use with all CONCOA automatic switchover systems, the new Advantium Series offers superior integration, protection, and convenience by allowing end-users to monitor normally open or closed contact devices with a single flip of a switch.
Equipment TM Advantium 2 Remote Alarm Specifications Features • High profile visible and audible notification • Audible alarm silence function • Two input channels and one output channel • One general dry contact relay output • NO or NC switch compatibility • Auto-reset when cylinders are replenished Ordering Information Part Number 529-5106-120 529-5106-220 529-5312 529-5296 Description Single-System Remote Alarm (120V) Single-System Remote Alarm (220V) Intrinsic Safety Barriers for 526 or 527 Series
Equipment TM 52 Series Description The 52B, 52C and 52S series Maniflex are modular gas distribution systems that may be connected to regulators, dual regulator switchovers, and AutoSwitch systems. A modular gas distribution system allows the user to size the inlet capacity of a system so that cylinder changes will not be as frequent. The Maniflex system provides the user with the capability of purchasing an unlimited number of manifold stations connected to a single header.
Equipment TM Dimensions (“A”, “B”, and “C” refer to the lengths specified on the diagram below.) Cylinders per Side 1 2 “A” Standard (Single Row) “B” Standard (Single Row) “C” Standard (Single Row) Weight Standard (Brass Single Row) Weight Standard (SS Single Row) “A” Compact (Single Row) “B” Compact (Single Row) “C” Compact (Single Row) Weight Compact (Brass Single Row) Weight Standard (SS Single Row) 2.5” 17.891” 35.781” 3.45 lbs 3.33 lbs 2.5” 17.891” 35.781” 3.45 lbs 3.33 lbs 14.5” 29.891” 59.
Equipment TM Leak-Tector™ Testing Solution Description Leak-Tector is specially formulated for testing lines, cylinders, and systems carrying oxygen and other compressed gases for leaks. The formulation contains no oil, grease fatty acids, ammonias, or any other ingredient that could combine with pure oxygen to form either a flammable or explosive mixture. Leak-Tector is simple to use. Apply the solution to a connection or surface suspected of leaking and watch for bubble clusters.
Equipment TM Flowmeter Tutorial Flowmeters are used to measure the rate of flow of liquids or gases. They do not control the rate of flow unless they are equipped with a control valve or flow controller. There are two basic types of flowmeters; rotameters and electronic mass flowmeters. ROTAMETERS Rotameters are a simple, precise and economical way to measure flow rates. They consist of a precision tapered glass tube containing one or more spherical floats. A measuring scale is etched on the glass tube.
Equipment TM Series 7920 Flowmeter Description The 7920 flowmeters provide the most accurate indication and precise control of fluids available for a wide range of applications. This versatile meter is functionally and dimensionally interchangeable with other current designs while incorporating many innovative features. All 7920 glass metering tubes have integral float guides to assure the accuracy of ±5% of full scale. Glass and stainless steel floats are standard.
Equipment TM Series 7920 continued Model Material Valve Type Ordering Information B7920* B7920V* B7920HA* Brass Brass Brass None Standard High Accuracy Model - X - Y S7920 S7920V* S7920HA* 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel None Standard High Accuracy M7920* M7920V* Monel® Monel® None Standard X=tube required Y=optional fittings 1, 2, 3, 4, 5, 6, 7, 8, 10 HB=hose barbs P4FF=1/4” NPT female T4FF=1/4” compression T2FF=1/8” compression Example: B7920V-2-T4FF is a br
Equipment TM Series 7950 Gas Proportioner Description The gas proportioner meters the flow of each of two gases and mixes them thoroughly in a special mixing tube to produce homogeneous twocomponent mixtures. Concentration accuracies of 10% of component value are maintained with a standard unit using typical calibration curves. (In a desired mixture of 1% gas A and 99% of gas B, a concentration between .9% and 1.1% is maintained.
Equipment TM Series 7974 & 7975 Large Flow Acrylic Flowmeters Description The Series 7974 and 7975 acrylic flowmeters are useful in a wide variety of applications involving non-corrosive gases where flow rates exceed those of traditional laboratory models. All units have direct reading scales in either liters/minute or cubic feet/ minute of air. Correction factors for other gases can be provided. Series 7974 Features Series 7975 Materials • Easy to read scales.
Equipment TM Series 7923 Economic Acrylic Flowmeter Description The Series 7923 acrylic flowmeters are an ideal low cost tool for measuring flow rates of inert and non-reactive gases. The 1/8” female standard inlet and outlet connections are contained in brass inserts to ensure a secure leak-free connection to prevent cracking of the acrylic body. A needle valve to control the flow rate is included.
Equipment TM Series 810C Mass-Trak Mass Flow Controllers Description How It Works Thermal mass flow controllers like the Series 810C MassTrak are more reliable than volumetric flow devices like rotameters because they are relatively immune to changes in gas temperature and pressure. Because these instruments measure molecular flow, they provide the most reliable, repeatable and accurate method of delivering gas to your system. The 810C is designed to control the flow of non-corrosive gases.
Equipment TM Series 810C Mass-Trak Mass Flow Controllers Series 810C Dimensional Drawing Ordering Information P/N 810C-DR-W-X-Y-Z (Select X, Y, and Z parameters from table below) W = Inlet and outlet connections: P4FF = 1/4” NPT female T2FF = 1/8” compression fittings (up to 15 slpm) T4FF = 1/4” compression fittings X = inlet and outlet pressure calibration: NF = normal pressure (up to 40 psig) MP = 40-150 psig Y = flow range: Z = factory set output option: 108 0-10 sccm = 00010 0-20 sccm = 0002
Equipment TM Series 7900 Eagle-Eye™ Flowmeter Alarm Description Advanced Features The Eagle-Eye alarm is a non-contact sensor designed to alert the user when flow rates exceed defined thresholds. The EagleEye alarm has read and green LED visual indicators and an audible buzzer indicator to provide flow rate status. A single unit can indicate either increased flow rate or decreased flow rate. The use of two units on a single flowmeter can provide both increasing and decreasing flow rates.
Equipment TM Series 820 Top-Trak Mass Flowmeters Description How It Works Thermal mass flowmeters like the Series 820 Top-Trak are more reliable than volumetric flow devices like rotameters because they are relatively immune to changes in gas temperature and pressure. Because these instruments measure molecular flow, they provide the most reliable and accurate method of delivering gas to your system. The 820 is designed to measure the flow of non-corrosive gases.
Equipment TM Series 820 Top-TraK Mass Flowmeters Series 820 Dimensional Drawing Ordering Information 822-W-X-Y-Z (Select X, Y, and Z parameters from table below) W = Inlet and oulet connections: P4FF = 1/4” NPT female T2FF = 1/8” compression fittings (up to 15 slpm) T4FF = 1/4” compression fittings X = inlet and outlet pressure calibration: NF = normal pressure (up to 40 psig) MP = 40-150 psig Y = flow range: Z = factory set output option: 0-10 sccm = 00010 0-20 sccm = 00020 0-50 sccm = 00050 0-1
Equipment TM Series 6200 Indicating Oxygen Trap Description This unit is a step above other indicating oxygen traps. The unit comes to you completely assembled and ready for installation. It is ideal for use in-line directly after our Series 6300 oxygen removing trap to determine when to replace the larger unit. Used in this way the 6200 unit will last a considerable time if it is monitored regularly. A centimeter scale on the tube helps you to monitor the condition of the reactants.
Equipment TM Series 6210 Oxygen removing purifier for hydrogen Description The Series 6210 Purifiers remove oxygen from hydrogen by catalytic action. They are capable of removing up to 1% oxygen from a hydrogen stream down to a level of less than 1 ppm. This reaction is normally accomplished at room temperature. At higher oxygen impurity concentrations, some-what elevated temperatures may be experienced depending on operating conditions.
Equipment TM Series 6400 CO2 Trap Description The 6400 Series carbon dioxide trap is designed to remove CO2 gas from air, argon, helium, hydrogen, or nitrogen. The trap body is constructed of borosilicate glass with nickel plated end fittings with stainless steel sintered frits.* The absorption media is a formulation of sodium hydroxide and calcium hydroxide with an high absorptive capacity and indicating properties.
Equipment TM Series 8012, 8020, & 8040, 8050 Indicating moisture traps Description These units are designed to remove water, oil and organics from gases commonly used as gas chromatography carrier gases. They are constructed from Lexan® polycarbonate tubing with aluminum end caps sealed with Viton® o-rings, except for the 8050 which has a solid aluminum housing and is thus non-indicating. All units are filled with a mixture of molecular sieve 13X and indicating molecular sieve 4A.
Equipment TM Series 8060 High capacity indicating moisture trap Description These traps are similar to the moisture traps on the opposite page but are capable of higher flow capacity and have greatly increased adsorption capacity. They are filled with a mixture of molecular sieve13X and indicating molecular sieve 4A. These are the highest capacity molecular sieves available and the preferred choice for gas drying. The blue indicating sieves turn buff color at 20% relative humidity.
Equipment TM Series 8200 Hydrocarbon traps Description These units are designed to remove organics, such as alcohols, aromatics, chlorinated hydrocarbons, esters, ethers, hydrocarbons, and ketones from air, hydrogen and inert carrier gases used in gas chromatography. They are constructed of aluminum and filled with extremely high surface area coconut shell based activated carbon. The 8200 is a refillable purifier.
Equipment TM Filter Applications Gas Chromatography Pneumatic Operated Devices Particulates in an instrument carrier gas stream can reduce the overall performance of laboratory analytical work.
Equipment TM Electronic Cylinder Scales Description The pressure of a liquefied gas remains constant as material is withdrawn as long as a liquid phase remains in the cylinder. When the liquid phase is exhausted the pressure drops very quickly and the cylinder empties without warning. This phenomenon renders a cylinder pressure gauge virtually useless. A similar situation arises when using cryogenic containers of liquid nitrogen, oxygen, and argon.
Equipment TM Model 900 Cylinder scale for liquefied gases Description The pressure of a liquefied gas remains constant as material is withdrawn as long as a liquid phase remains in the cylinder. When the liquid phase is exhausted the pressure drops very quickly and empties without warning. This phenomenon renders a cylinder pressure gauge virtually useless. The only way to monitor the contents of a cylinder containing a liquefied gas is by weight.
Equipment TM Series 8491 Flash Arrestor Description Features The new 8491 Series re-settable flashback arrestors offer four (4) safety devices in each unit. Safety features include protection against flashbacks with a wide range of mixtures of oxygen or air with flammable gases including hydrogen, acetylene, methane and LPG gases. The design includes a built-in non-return (check) valve to stop reverse flow and a thermal shut off which stops gas flow in the event of hose or pipe line fire.
Equipment TM Series 8100 Miniature forged needle valves Description These valves are used in a wide variety of industrial and laboratory applications. They offer excellent flow control and both the brass and stainless steel models have Teflon® packing Specifications Max. Operating Pressure 3000 psig Operating Temperature range -65° to 165°F Flow coefficient (Cv) 0.
Equipment TM Series 8300 High purity diaphragm packless valves Description Advanced Features Typical Applications The multiple metal diaphragm design and Kel-F® seat are the key elements to the high purity success of these valves. They are available ina variety of styles and fitting configurations to meet virtually any application.
Equipment TM Series 8600 Relief valves Description Features These easily field adjustable relief valves provide for the protection of equipment components installed in systems where they may be exposed to over pressurization due to the failure of another component or an operator error.
Equipment TM Series 8500 Manual control valves Description Manual controls are designed for direct connection to a compressed gas cylinder valve outlet. They provide a simple means of transferring the contents of a cylinder to another system or vessel. They DO NOT control pressure and should never be used without an operator in attendance at all times.
Equipment TM Gas Detection Systems Fixed Installation Type – Beacon 100, Beacon 200, and Beacon 800 Description Gas detection should not be complicated. The Beacon™ Series is gas detection simplified. The Beacon™ Series are powerful, low cost fixed system controllers for one, two, or up to eight points of gas detection. They are microprocessor controlled, versatile, simple to install and operate, and priced to be the industry’s best value single and multiple gas detection controllers.
Equipment TM Fixed Installation Type – Beacon 100, Beacon 200, and Beacon 800 Gas Detection Systems Ordering Information When ordering a Beacon system please specify the following components: 1. Controller part number 2.
Equipment TM Physical • Enclosure Wall mounting gray polycarbonate with hinged cover Dimensions • Conduit Connection ½” NPT conduit hubs Beacon 100 Height: 8.5 Width 7.0” Depth 4.3” Beacon 200 Height: 8.5” Width: 7.0” Depth: 4.3” Beacon 800 Height: 12.5” Width: 11.0” Depth: 6.4” 2 3 4 • Wiring Termination: Screw type terminal block14 gauge max.
Equipment TM Measurable Gases Ammonia NH3 Arsine AsH3 Boron Trichloride BCl3 Boron Trifluoride BF3 Carbon Tetrachloride CCl4 Carbon Monoxide (XP) CO Chlorine Cl2 Chlorine Trifluoride ClF3 Combustibles (XP) LEL Combustibles (4-20mA) (XP) LEL Diborane B2H6 Dichlorosilane DCS Disilane Si2H6 Fluorine F2 Germane GeH4 Hydrazine N2H4 Hydrogen H2 Hydrogen (Direct) H2 Hydrogen (Specific) H2LEL Hydrogen (4-20mA) H2 Hydrogen Bromide HBr Hydrogen Chloride HCl Hydrogen Chloride HCl Hydrogen Cyanide HCN Hydrogen Cyanid
Equipment TM Eagle Portable Gas Detector Description The EAGLE is a powerful instrument that does more than offer standard confined space protection. The EAGLE also provides detection combinations never before offered in a portable gas monitor featuring the industry’s widest selection of high quality, long life and field proven sensors. The EAGLE’s ergonomic design offers easy access to controls such as auto-calibration, alarm silence, demand zero, peak hold and a wide variety of other features.
Equipment TM Specifications for Eagle Portable Gas Detector • Enclosure Weatherproof, chemical resistant, RF/EMI coated high impact poly-carbonate-polyester blend. Can be set in rain or into 2.5” water without damage. Ergonomically balanced with rugged top mounted handle. • Dimensions 10.5” long x 5.9” x 7” tall • Weight 5 lbs. • Detection Principle Catalytic combustion, electrochemical cell, and infared. • Sensor Life 2 years under normal conditions.
Equipment TM Model 400 & Model 420 Cylinder Holding Devices OSHA regulations require compressed gas cylinders to be secured from toppling when in storage or in use. The devices shown here will help you comply with these regulations. Description Wall Mount Cylinder Holder Model 400 This cast aluminum cylinder holder provides an easy way to secure cylinders to a wall, in a gas storage cabinet, or other stable surface.
Equipment TM Model 450 & Model 460 Small & Large Cylinder stands Description Description Small Cylinder Stand Model 450 Large Cylinder Stand Model 460 This stand provides increased stability to cylinders with diameters of 4” to 7-3/8”. It is constructed of nickel plated steel. Four thumb screws hold the stand securely to the cylinder. Stand height is 10”.
Equipment TM Series 465 Description Available in two and three cylinder models, these floor stands are designed and built to provide safe storage of compressed gas cylinders with diameters up to 12” when a walk, post or bench is not available to secure the cylinder. Fully welded construction form 11 gauge and heavier plate steel and a quality epoxy powder paint finish provide structural integrity and long service life. Surfaces coming in contact with they cylinders are protected with vinyl edge guards.
Equipment TM Series 495 “Gas Station” process stands Description There are many situations where it would be more convenient to locate gas cylinders and distribution systems near the process, but away from a wall or other secure fixture. The “Gas Station” solves this problem. It can be located in any open area and support two or three cylinders and the associated gas distribution equipment. The stand is secured to the floor with bolts through the four pre-drilled holes provided in the base.
Equipment TM Series 490 Cylinder storage racks Description The storage compressed gas cylinders to comply with Federal, State and Local regulations often presents a number of problems. These new cylinder storage racks can help organize your cylinder storage and help you comply with the myriad of regulations. Because the frame is pre-drilled to accommodate anchoring the rack to the floor they are ideal for situations where cylinder must be located away from a wall or other securing fixture.
Equipment TM Cylinder hand trucks Model 6114 & Model 6214 Description These hand trucks are specially designed to hold and easily transport heavy compressed gas cylinder by persons of moderate strength. They feature welded tubular steel construction for strength. All models roll quietly and smoothly on large semi-pneumatic or solid rubber tired wheels and casters for better maneuverability over rough or uneven surfaces.
Equipment TM Series 7000 Gas safety storage cabinets Description Gas safety storage cabinets are designed to provide local exhaust gas control to enhance the safety of storing or using hazardous gases. The use of gas cabinets provides a convenient way to achieve separation of gases by their classifications to satisfy both national and local fire and building codes.
Equipment TM Model 6114 & Model 6214 Cylinder hand trucks Description Model 90001 This universal cylinder wrench has 3 openings on one end (11/16”, 1-1/8”, 1-1/4”) for tightening the various cylinder valve connections and most commonly used gas connections. The opposite end has 3/8” square box for opening cylinder valves that do not have hand wheels. Model 90002 This wrench has a basic 3/8” square for opening cylinder valves that do not have hand wheels, such as chlorine and hydrogen sulfide.
Equipment TM Series 601, 602, 604, and 605 316 Stainless steel flexible hose Description Series 601 hoses are constructed of 1/4” I.D. Teflon® lined stainless steel braid, rated for 3000 psig. The 601 hoses are fitted with 1/4” NPT brass end connections; they make excellent economical manifold pigtails. The 602 hoses are fitted with 1/4” NPT stainless steel end connections.
Equipment TM UHP (DISS) Cylinder Connections Description Features This special group of cylinder connections was developed through • Available with in three mating styles the cooperation of industry and the Compressed Gas Association 1/4” face seal male for use with ultra purity gases primarily used in conjunction with 1/4” NPT male semiconductor chip manufacturing applications.
Equipment TM Pressure Gauges Features Description The selection of brass, stainless steel, and monel® gauges presented here represent those used on pressure regulators offered in this catalog. They can be used as repair parts or for installation in other systems. • 1/4” NPT lower male connection • Cleaned for oxygen service - brass and stainless steel only Ordering Information Brass with Brass Case - 2-1/2” Dia. Model Pressure Range psi 316 Stainless Steel with Stainless Steel Case - 2-1/2” dia.
Support TM Cylinder Connections Description Regulator inlet connections are available for most worldwide standards. Each connection includes nut, gland, and washer (if appropriate) on the inlet side to connect to the cylinder and ¼” MPT connection on the outlet side to con nect to the inlet of any PurityPlus regulator. CGA (Compressed Gas Association) connections are manufactured in accordance with CGA standard V-1 (1997).
Support TM Gas Safety and Material Compatibility Data Chart This data has been compiled from the best information available and is offered as a guide to proper material selection. The data presented are generalized for average conditions of temperature and pressure. The user should always investigate the characteristics of the gas being handled and take all the proper precautions. Our technical staff will be pleased to give free advice and technical information on any gas or chemical product of interest.
Support TM Gas Safety and Material Compatibility Data Chart Brass Steel Stainless Steel Kel-F® Teflon® R R R R R R N X R R R R Monel® Copper R Corrosive Aluminum Materials of Construction R Flammable Toxic Hazards for Humans Gas Methane Special Characteristics Methyl Acetylene Methyl Bromide X R R R R R R Methyl Chloride N X R R R R R Forms explosive compounds with aluminum Methyl Mercaptan R N X R R R R Monoethylamine
CGA Connections Chart 146 www.purityplusgas.
Conversion Factors TM Length Å cm ft in m micron mm yd Multiply By Å -------- 1 x 10 -8 3.28 x 10 -9 3.93 x 10 -9 1 x 10 -10 1 x 10 -4 1 x 10 -7 1.09 x 10 -10 cm 1 x 10 8 -------- 3.28 x 10 -2 3.94 x 10 -1 1 x 10 -2 1 x 10 4 10 1.09 x 10 -2 ft 3.04 x 10 9 3.048 x 10 1 -------- 1.2 x 10 1 3.04 x 10 -1 3.04 x 10 5 3.04 x 10 2 3.33 x 10 -1 in 2.54 x 10 8 2.54 x 10 0 8.33 x 10 -2 -------- 2.54 x 10 2 2.54 x 10 4 2.54 x 10 1 2.77 x 10 2 m 1 x 10 10 1 x 10 2 3.
Gases CGA Selection Chart TM PURE GASES CGA SELECTION CHART FOR FITTINGS CGA Fittings Required MIXED GASES CGA SELECTION CHART FOR FITTINGS CGA Fittings Required Pure Gases Mixed Gases Minor Component in Major Component 510/300 Acetylene 240/660/705 Ammonia Nitrogen 590/346/347/702 Air 350 Butane Nitrogen 240/660/705 Ammonia 296 Carbon Dioxide Oxygen 580/680/677 Argon 580 Carbon Dioxide Helium or Nitrogen 350 Arsine* 580 Helium 320 Carbon Dioxide Carbon Dioxide and/or Nitro
Conversion Factors TM Weight gm kg mg oz lbs Ton gm kg -------1000 0.001 2.83 x 10 1 4.54 x 10 2 9.07 x 10 5 .001 -------1 x 10 -6 2.83 x 10 -2 4.54 x 10 1 9.07 x 10 2 mg Multiply By 1000 1 x 10 6 -------2.83 x 10 4 4.54 x 10 5 9.07 x 10 8 oz lbs Ton 0.035 3.53 x 10 1 3.53 x 10 -4 -------16 3.2 x 10 4 0.002 2.205 2.205 x 10 -6 6.25 x 10 -2 -------2.0 x 10 3 1.1 x 10 -6 0.001 1.1 x 10 -9 3.13 x 10 -5 5.0 x 10 -4 -------- Volume cm3 (ml) ft3 in3 m3 US gal.