Datasheet

Figure 13 — Basic Read Timing Parameters
Figure 14 — Read Burst Showing CAS Latency
7.5.1 Rea
d to Read
Data from a read burst may be concatenated or truncated by a subsequent READ command. The first data from the new burst
follows either the last element of a completed burst or the last desired element of a longer burst that is being truncated. The new
READ command should be issued X cycles after the first READ command, where X equals the number of desired data-out element
pairs (pairs are required by the 2n prefetch architecture). This is shown in Figure 15.
AS4C32M16MD1A-5BCN
Confidential
- 24/56 -
Rev.1.2 July 2016