Datasheet

Single-Ended AC and DC Input Levels for DQ and DM(1.5V)
Symb
ol Pa
rameter Min. Max. Units Notes
V
IHDQ (DC100) DC input logic high VREF + 0.100 VDD V 1
VILDQ (DC100) DC input logic low VSS VREF - 0.100 V 1
VIHDQ (AC175)
V1,2
AC input logic high
- -
V
ILDQ (AC175) V1,2
AC input logic low
- -
V
IHDQ (AC150)
AC input logic high
V
REF + 0.150 -
V1,2
V
ILDQ (AC150)
AC input logic low
- V
REF - 0.150
V1,2
V
IHDQ (AC135)
AC input logic high
-
-
V
1,2
V
ILDQ (AC135)
AC input logic low
- -
V1,2
V
REFDQ (DC) Reference voltage for
DQ, DM inputs
0.49 * VDD 0.51 * VDD V 3,4
NOTE :
1. For DQ and DM : V
REF = VREFDQ (DC).
2. See Overshoot and Undershoot Specifications section.
3. The AC peak noise on V
REF may not allow VREF to deviate from VREFDQ (DC) by more than ±1% VDD
(for reference: approx. ±15 mV).
4. For reference: approx. VDD/2 ±15 mV.
5. VIH(dc) is used as a simplified symbol for VIH.DQ(a) 1.35V : DC90, b) 1.5V : DC100)
6. VIL(dc) is used as a simplified symbol for VIL.DQ(a) 1.35V : DC90, b) 1.5V : DC100)
7. VIH(ac) is used as a simplified symbol for VIH.DQ(AC175), VIH.DQ(AC150) ; VIH.DQ(AC175) value is used when
VREF + 175mV is referenced, VIH.DQ(AC150) value is used when VREF + 150mV is referenced.
8. VIL(ac) is used as a simplified symbol for VIL.DQ(AC175), VIL.DQ(AC150) ; VIL.DQ(AC175) value is used when
VREF - 175mV is referenced, VIL.DQ(AC150) value is used when VREF - 150mV is referenced.
AS4C256M16D3LB-12BIN
AS4C256M16D3LB-12BCN
Confidential
- 19 of 46 -
Rev.1.1 Jan. 2017